When I stop at a light or pull in my drive way I stall out, not all the time but sometiems, im wondering if anyone else has had or is having this issue and how to solve it

 

Make sure that you have placed the gasket for the Air injection system in the right place by that i mean it is easy to put the one that goes on top on the bottom and vice versa. A lot of my problems with my "Lean condition with greddy" post came from the fact that the mechanic who installed my system installed them backwards.

 

Im going lean at high gears and high rpms, im good untill 5th gear , that could be cause of that also?

 

Do you have a BOV installed. If so, it may need adjusting. Philodox had some stalling issues due to the BOV soft setting. post here.

 

I am now. See my other thread.

 

Yea i have a Bov its the New Rs Version, Im havin the exact same problem he was havin, i pmed him hopefully i can tighten her up some how and be good

 

It's fairly simple to adjust. Just loosen the nut with a wrench (turn it counter clockwise). Then get the appropriate size allen wrench and turn the screw clockwise to tighten it.
I had to play around with my Type S BOV to get it at the right setting.

edit: I forgot to add that the nut needs to be tightened after you adjust the screw. It acts as a locking nut to keep the screww from moving.

 

thanks man