The Great Renesis Porting Project!
12-06-2006, 01:13 PM
#1052
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by patrick_andraste
Not too much noise?
all my vehicles set off car alarms. I just have to try harder with my -8
Noise is good.
all my vehicles set off car alarms. I just have to try harder with my -8
Noise is good.
renesis don't make no noise
i've driven a gutted renesis with a catback and you could still hold a conversation right next to the tailpipes.
my fd, on the other hand..... well, 3 1/2" exhaust
12-06-2006, 01:39 PM
#1053
PingMobile
Join Date: Feb 2005
Location: Oakland
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
My Renesis is ported, but the stock GReddy turbo can't even come close to feeding it.
If anyone has a 3071 or gt35r they want to get rid of, I am soooo there!
Hey GuitarJunkie, would you be game to help me fit a bitter turbo to my car?
I'm using an XEDE vs Interceptor. The XEDE takes full control of fuel & spark, has a built in boost controller, and the software rocks so it's pretty sweet.
If anyone has a 3071 or gt35r they want to get rid of, I am soooo there!
Hey GuitarJunkie, would you be game to help me fit a bitter turbo to my car?
I'm using an XEDE vs Interceptor. The XEDE takes full control of fuel & spark, has a built in boost controller, and the software rocks so it's pretty sweet.
12-06-2006, 01:53 PM
#1054
White RX8 R3
I'm sorry if it was posted earlier in this thread but I gest I was too lazy to go through all the 70 pages so.....anyone saw that those guy did ported the renesis here's the link...http://www.rotaryheads.com/news/index.html
12-06-2006, 02:02 PM
#1055
Thread Pirate, Ahhrrrrr
Join Date: Aug 2006
Location: Long Island, NY
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm I wonder whos site that is? 
[jokie] But whomever he is, he seems kinda lazy. Definitely doesn't seem like the site of someone who will post mind blowing mouth watering porting goodness to a forum or anything. [/jokie]
P.S. Would you guys be willing to give Snoochie a call and at least find out who the car is doing? To bad he hasn't spent the last $100 or so to get the most out of this mod after paying close to $1000 so far.
[jokie] But whomever he is, he seems kinda lazy. Definitely doesn't seem like the site of someone who will post mind blowing mouth watering porting goodness to a forum or anything. [/jokie]
P.S. Would you guys be willing to give Snoochie a call and at least find out who the car is doing? To bad he hasn't spent the last $100 or so to get the most out of this mod after paying close to $1000 so far.
Last edited by SmokeyTheBalrog; 12-06-2006 at 02:09 PM.
12-06-2006, 05:20 PM
#1058
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sapphonica
Hey GuitarJunkie, would you be game to help me fit a bitter turbo to my car?
i've got a modded greedy turbo with a clipped turbine and 57-trim t4 compressor wheel. easy bolt on an 300+ whp capabilities.
12-06-2006, 11:18 PM
#1060
Gotta Love Two Strokes
Originally Posted by guitarjunkie28
renesis don't make no noise
i've driven a gutted renesis with a catback and you could still hold a conversation right next to the tailpipes.
my fd, on the other hand..... well, 3 1/2" exhaust
i've driven a gutted renesis with a catback and you could still hold a conversation right next to the tailpipes.
my fd, on the other hand..... well, 3 1/2" exhaust
11.5:1 Compression. Straight through 50mm (2.5 inch) dual exhaust. dual throttle bodies that I think are 66mm each. (I woill have to check on the throttle body size if people really want to know exactly)
it shakes the house if I start it in the garage.
12-07-2006, 01:32 AM
#1064
RX-8 = Japanese MG
Join Date: Dec 2006
Location: Bay area, CA
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
formerly known as Sapphonica
Originally Posted by guitarjunkie28
hey mang,
you know you pm'd me, but turned your pm's off so i couldn't respond?
you know you pm'd me, but turned your pm's off so i couldn't respond?
12-07-2006, 04:32 AM
#1065
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
in a nutshell, it'll be $550 to mod your turbo to the same specs as mine.
clipped turbine, 57-trim t4 compressor wheel, stock housing punched out, rebuilt and balanced. so it'll look identical to the standard greedy turbo on the outside, but it'll pack a lot more punch up top.
next step up from that is the mazsport turbo, unless you wanna go apeshit and weld a t3 flange on your greedy manifold and bash away at your firewall so we can fit a bigger turbine housing in there.
if you wanna go that route, a gt35r "hifi"ish kinda turbo might work. just like the 60-1's in the t04b compressor housings, i bet we could do the same thing with a 35r. if you're on a budget and don't want the gt stuff, i'm sure we can find a t3 housing that'll take a p-trim turbine, then we could do a t3/t4, 60-1 hifi with it. that thing would put out.
see how much the mazsport motor mounts are so we have some room to work with and we can go as crazy as you want with it.
clipped turbine, 57-trim t4 compressor wheel, stock housing punched out, rebuilt and balanced. so it'll look identical to the standard greedy turbo on the outside, but it'll pack a lot more punch up top.
next step up from that is the mazsport turbo, unless you wanna go apeshit and weld a t3 flange on your greedy manifold and bash away at your firewall so we can fit a bigger turbine housing in there.
if you wanna go that route, a gt35r "hifi"ish kinda turbo might work. just like the 60-1's in the t04b compressor housings, i bet we could do the same thing with a 35r. if you're on a budget and don't want the gt stuff, i'm sure we can find a t3 housing that'll take a p-trim turbine, then we could do a t3/t4, 60-1 hifi with it. that thing would put out.
see how much the mazsport motor mounts are so we have some room to work with and we can go as crazy as you want with it.
12-07-2006, 06:29 PM
#1066
RX-8 = Japanese MG
Join Date: Dec 2006
Location: Bay area, CA
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by guitarjunkie28
in a nutshell, it'll be $550 to mod your turbo to the same specs as mine.
clipped turbine, 57-trim t4 compressor wheel, stock housing punched out, rebuilt and balanced. so it'll look identical to the standard greedy turbo on the outside, but it'll pack a lot more punch up top.
next step up from that is the mazsport turbo, unless you wanna go apeshit and weld a t3 flange on your greedy manifold and bash away at your firewall so we can fit a bigger turbine housing in there.
if you wanna go that route, a gt35r "hifi"ish kinda turbo might work. just like the 60-1's in the t04b compressor housings, i bet we could do the same thing with a 35r. if you're on a budget and don't want the gt stuff, i'm sure we can find a t3 housing that'll take a p-trim turbine, then we could do a t3/t4, 60-1 hifi with it. that thing would put out.
see how much the mazsport motor mounts are so we have some room to work with and we can go as crazy as you want with it.
clipped turbine, 57-trim t4 compressor wheel, stock housing punched out, rebuilt and balanced. so it'll look identical to the standard greedy turbo on the outside, but it'll pack a lot more punch up top.
next step up from that is the mazsport turbo, unless you wanna go apeshit and weld a t3 flange on your greedy manifold and bash away at your firewall so we can fit a bigger turbine housing in there.
if you wanna go that route, a gt35r "hifi"ish kinda turbo might work. just like the 60-1's in the t04b compressor housings, i bet we could do the same thing with a 35r. if you're on a budget and don't want the gt stuff, i'm sure we can find a t3 housing that'll take a p-trim turbine, then we could do a t3/t4, 60-1 hifi with it. that thing would put out.
see how much the mazsport motor mounts are so we have some room to work with and we can go as crazy as you want with it.
12-14-2006, 08:25 PM
#1071
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
no idea. i haven't talked to him for a while.
last time i saw the car in person was at the body shop sometime last year. he got rear-ended, and the body shop left his lights on or something, so i went down there and unflooded it. that's actually the last time i talked to him, i think.
last time i saw the car in person was at the body shop sometime last year. he got rear-ended, and the body shop left his lights on or something, so i went down there and unflooded it. that's actually the last time i talked to him, i think.
