Dondo's Second Supercharger Build
#54
Registered
iTrader: (3)
behind the front bumper support--its tight but it does fit--then just ever so slightly angle it backwards.
It has a built in bung for a temperature sensor at the bottom--which is nice to have. Also cut the top half off the front bumper support--it is internally separated by a solid sheet of metal, for more airflow across the top of the cooler and that support acts like a large heatsink
It has a built in bung for a temperature sensor at the bottom--which is nice to have. Also cut the top half off the front bumper support--it is internally separated by a solid sheet of metal, for more airflow across the top of the cooler and that support acts like a large heatsink
#56
Registered
iTrader: (3)
https://www.rx8club.com/attachment.p...1&d=1343835024
heres a little better pic of the way its mounted and what the front support looks like after cutting--since that picture i have extended the cut all the way across. My secondary radiator is mounted on the front side of the same beam--its a 21X7 cooler. So it is not very tall.
I now have my intake outside the engine bay too. Cutting that support bar gave me much more room so I could use a regular AEM filter.
heres a little better pic of the way its mounted and what the front support looks like after cutting--since that picture i have extended the cut all the way across. My secondary radiator is mounted on the front side of the same beam--its a 21X7 cooler. So it is not very tall.
I now have my intake outside the engine bay too. Cutting that support bar gave me much more room so I could use a regular AEM filter.
Last edited by olddragger; 08-01-2012 at 10:36 AM.
#65
Mr. Örange
Well here are some pics and vids of the dyno day.
On the dyno
MM doing his business
The flange bolts broke off during the dyno process
On the dyno
MM doing his business
The flange bolts broke off during the dyno process
Last edited by TANKERG; 08-06-2012 at 10:23 PM.
#73
catback is ordered
oil leak in relo kit is fixed
GOODbox gauges are installed
Turbosmart bypass to blowoff valve is up next. The inlet/outlet diameters are different that the one I was running so I am making some silicon reducers today to mate with the 1" in/out on the blower kit. I have some proper ones ordered for arrival next week.
oil leak in relo kit is fixed
GOODbox gauges are installed
Turbosmart bypass to blowoff valve is up next. The inlet/outlet diameters are different that the one I was running so I am making some silicon reducers today to mate with the 1" in/out on the blower kit. I have some proper ones ordered for arrival next week.