screw that ill get it, im plannin on upgrading turbos, i just need to break in the new motor.. im just wondering what i should start wiht fuel and seals, or what else can be done... you know what i mean im not to sure on the rotor eninge and i just wanna second opinion from the shop thats installing it.. thanks for the input htough i needed to know that 9 psi on the stock greddy.. what exhoust do you reccomend?

 

ok.

exhaust at you point does not matter.. common sense does. get some..

hint. 9psi on the greedy without a tuner that knows what they are doing = fail and money you dont have.

you can pay me now or you can pay me later..

beers

 

with the exhaust im not talking about now, i mean later.. i know it doeesnt matter on this turbo, im using this turbo to breakin the motor, then im going to upgrade the turbos, they have a 20b twin turbo motor wiht 48k mmiles on it for sale to at the shop for 4900 im thinking about buying that and rebuilding it and then getting some real horsepower.

 

wow,

this covers all of the stupid..

i think this thread is done..

beers

 

man you guys are dicks, ill figure it out

 

a good exhaust esp. for FI is the turboXS system. It is a true 3" exhaust and comes with the catless midpipe. It's a good price as well.

As far as upgrading the internals of the engine....you really don't have to worry about it if you have a rock solid tune. Once you do upgrade your greddy turbo, a safe whp is around 300-330 or so....once you get to that point, injectors should be replaced. I believe the stock fuel pump is good to 350whp or so....There is an upgrade though at www.mazsport.net.

Keep in mind, we have never seen a turbocharged Renesis dyno at 400HP at the wheels. If you want that kind of power, than maybe that 20B is a better option for you, although the cost of fabrication to get that to fit is going to be outrageous. GL, and don't mind some of the veterans here, they can get cranky at newbies. There is a lot of great info on this forum, do some reading!

 

We haven't?

 

that comment is as dirty good as your now avatar!!!

and i guess i have to say good job.



beers r

 

I think he meant we in the royal sense as in "the forum" . If you have seen it quit messin about and put it up .....

 

sorry,

was looking at the royal avatar..

i have to say.. 325 to 350 to the wheel.. i think that covers most of it..

but nice avatar again.. buy ez.. has a nice different side..

beers

 

Scott - have i ever told you that I don't understand WTF you are saying half the time ? - must be a translation issue

 

nice new avatar rack. royal.. this is the new mm avatar..

would have to bet in the real world what was seen that was productive would have to have been in the 325 to 350 whp..

as to the ez avatar comment. check you pm..

zesty.

btw, you think faster than i..

beers

 

Hinting _gently_ that you have cracked 400 won't convince me that you have. Why not post the dyno if you have one?

 

assuming your statement is right on the money, i seriously doubt he gives a rats *** if you would believe it or not

 

If he didn't give a rats *** , he would not have even mentioned it .........

 

I just don't get why if the dyno is there, it wouldn't be posted. I'm not saying it doesn't exist, in fact it probably does somewhere, I'm asking why he refuses to show anyone.

 

There is much that you, and many others, don't get.

There is much that I don't get, I'm sure.

However, I have nothing to gain here other than to mention that there is much more happening out there than what is represented on this forum.
The forum is just a communication tool and, like all forms of communication, it can and will be manipulated to the advantage of the speaker.

 

LoL, not that I was expecting a straight answer.

I suppose if you have it, eventually we'll end up seeing it.

 

Anyone know what happened to MadDog's maps? They don't seem to be here anymore...

 

Im working on Greddy fix #2, and Im having a hard time locating the nipple. I have been to every parts store, home depot, lowes, ace hardware, and no one carries 1/8 nipple. The smallest I can find is 1/4. I found this one at work, but the nipple is alittle short and its brass. Can I get away using this one or should I keep trying to find a longer nipple? Thanks,

 

that is to screw into the turbo housing right ? Can't see why that would not be ok .

 

Yes, that is what is going to be tapped into the pipe attached to the compressor side of the turbo. My main concern was how short the nipple is, (is it long enough to securely hold the hose) and brass has a lower meltling point than stainless and not real sure how hot the compressor side gets. Looks like brass melts around 1600f so I would think that shouldnt be a problem. Just wanted to make sure I was good before I got it in there just for it to fail. Thanks!

 

LOL Brass isn't going to melt with your intake air, it can handle engine oil and coolant so yeah, it's fine. And the length of the hose barb isn't a problem

 

Just wondering how you all adhere the nipple to the pipe?? I found a better fitting which is stainless steel and the nipple is exactly the same size as the waste gate actuator. Talked to a couple friends and they think the 90 degree pipe that connects to the turbo is to thin to tap, being as it would only hold with about 3 threads. They also said its hard to weld stainless steel and cast aluminum. Just looking to see how everyone adapted their fitting on their pipe. Trying to get the install done this week and this is my last hang up. (Hopefully)
Thanks!
Adam

 

no you can tap that pipe.