Brettus turbo 111 (the ultimate Renesis turbo ?)
The following 3 users liked this post by Brettus:
#1681
^Do not worry, I'm sure you come up with a new one, during this one :P
#1683
Hybrid Greddy Boosted
I only lasted one test drive with a screamer pipe lol Even if it's temporary, at least it'll tell you if the exhaust can be improved.
By "Internal Engine Mods" I hope you mean an extra rotor...or at least a thicker center iron for moar exhaust flow!
Come on, spill the details!
By "Internal Engine Mods" I hope you mean an extra rotor...or at least a thicker center iron for moar exhaust flow!
Come on, spill the details!
The following users liked this post:
RotaryMachineRx (07-13-2018)
#1687
Just came back from holiday . New engine is built ...picking it up today. Will be taking my time putting it in and getting it ready for one last ditch attempt at the world record whp for a Renesis.
I'm quietly confident that these porting mods will work ..............................as I have been through all my previous failures
I'm quietly confident that these porting mods will work ..............................as I have been through all my previous failures
The following users liked this post:
RotaryMachineRx (07-17-2018)
#1690
Registered
Peripheral port the exhaust with a 5:1 undivided turbo flange and be done with it already.
The following 3 users liked this post by Brettus:
The following users liked this post:
RotaryMachineRx (07-25-2018)