Base map
02-24-2008, 07:05 PM
#2
02-24-2008, 07:10 PM
#4
Registered User
Thread Starter
Join Date: Feb 2008
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Yea stock injectors My email address is rhettman001@yahoo.com thankyou
02-25-2008, 01:54 AM
#8
Registered User
Thread Starter
Join Date: Feb 2008
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
ok got base map provided by mysql loaded onto the emanage. Changed spark plugs to all trailing ngk BUR9EQP8 with shims for the trailing plugs. Put hallman boost contoller on. Now when car goes into boost starts bogging and backfiring. Did have emanage disconnected from wiring harness to read serial number. Tuner checking connections right now(suspect pressure sensor connection). Tee'ed boost controller from wastegate to vaccum line coming off throttle body which also connects to bov, emanage pressure sensor, and boost guage sensor. Any ideas? I dont want my tuner to give up on it any help greatly appreciated.
Last edited by Gturbo8; 02-25-2008 at 01:57 AM.
02-25-2008, 02:22 AM
#9
Registered User
Thread Starter
Join Date: Feb 2008
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Ok my tuner figured it out. Seems that having the boost contoller on the same vaccum line as the pressure sensor was messing the signal up. Got it squared away but per advice from my tuner .4 bar is not enough!!!! How/where can i connect my boost contoller to. Were gonna try to connect it to the intake manifold nipple(s)(passenger side down by turbo) where is was originally connected to when it was just the wastegate to the nipple(s). Also we want to leave the emanage pressure sensor connected to the vfad vaccum fitting on throttle body. So need to reroute my bov and boost guage and possibly my boost contoller elsewhere. Those brave souls who have turboed there rx8's where do you have your bov, boost guage, boost contoller, and pressure sensor routed too?
Thread
Thread Starter
Forum
Replies
Last Post
yurcivicsux
Series I Major Horsepower Upgrades
192
09-12-2017 10:54 PM
