Notices

stereo not working

Thread Tools
 
Rate Thread
 
Old Nov 18, 2007 | 03:55 AM
  #1  
nvmyre's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 9
Likes: 0
stereo not working

hi well just wondering if anyone can point me in the rite direction as to whats wrong i went to remove the stereo today and check the plugs when i turned the ignition on there is nothing the lcd doesnt light up the air con climate control none of it works the only thing on the centre panel that works is the hazzard light switch


i have checked the fuses they seem fine ..any idea why it would just stop working man i hope i dont have to replace the unit
Reply
Old Nov 21, 2007 | 05:39 PM
  #2  
firebirdude's Avatar
User and Abuser
iTrader: (3)
 
Joined: Nov 2006
Posts: 3,113
Likes: 9
From: Sunshine State
#1 Double check all your connections.
#2 Use a DMM to insure all the fuses are infact intact. Sometimes they look ok, but are infact blown.
#3 Use the DMM and test for voltage right at the stereo harness. If you've got no battery voltage, then your stereo etc. is probably fine. Just start tracing the wiring back until you find the problem.

But it does sound like a blown fuse. FYI, disconnect the battery before jerkin around with the electronics next time.

Last edited by firebirdude; Nov 21, 2007 at 05:41 PM.
Reply
Old Nov 21, 2007 | 06:06 PM
  #3  
Mazurfer's Avatar
Surf Hard, Drive Hard
 
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
Remember........there are fuses in the drivers side panel and also in the engine bay that need to be checked. I'm on the laptop and can't look right now as the wiring diagrams are on my other computer.
Reply
Old Nov 21, 2007 | 07:02 PM
  #4  
DeViLbOi's Avatar
The devil made me do it
iTrader: (1)
 
Joined: Jul 2007
Posts: 3,708
Likes: 2
From: Colorado Springs, CO
Isn't the Hazard switch in the same harness as the LCD Display though?
Reply
Old Nov 21, 2007 | 07:25 PM
  #5  
Juice's Avatar
I made some poos
iTrader: (1)
 
Joined: Sep 2005
Posts: 841
Likes: 0
From: Pittsburgh, PA
^ I don't know if its in the same harness but it doesn't have a connection of its own.
Reply
Old Nov 22, 2007 | 01:47 AM
  #6  
WikkedOne's Avatar
Deals on wheels
 
Joined: Apr 2005
Posts: 987
Likes: 6
From: Murfreesboro, TN
did you remove the stereo and then put it back in and the n it didn't work? if so then probably what happened is you messed up the connection between the "face" and the rest of the HU - it happens alot actually and nobody knows what the hell is going on

the way to fix it is to take the radio out - unscrew the face piece and put it back together carefully

If you didn't remove the stereo before it stopped working then it's probably not that..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
yapakanichi
Series I Interior, Audio, and Electronics
8
Aug 17, 2015 09:47 AM
MolecularConcept
New Member Forum
15
Aug 5, 2015 04:43 PM
ion_four
Series I Trouble Shooting
1
Jul 30, 2015 09:48 PM
yapakanichi
RX-8 Parts For Sale/Wanted
1
Jul 21, 2015 08:43 PM
Majictoast
New Member Forum
1
Jul 18, 2015 06:45 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 10:28 PM.