Request the RX8 Club Approval
04-11-2007, 10:55 PM
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: Boston, MA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Request the RX8 Club Approval
Alright, after looking around ebay for a while I narrowed my search to the following:
Subs
Box
Amp 1
Amp 2
You may of noticed there are two amps there, basically because im not sure if I should stick with that 400W one or try the more powerful one. As you can tell I have never installed an amp before so bare with me.
Anyways, does this for the most part look decent? And where do I research the necessary wires I will need for installation?
Thanks
Subs
Box
Amp 1
Amp 2
You may of noticed there are two amps there, basically because im not sure if I should stick with that 400W one or try the more powerful one. As you can tell I have never installed an amp before so bare with me.
Anyways, does this for the most part look decent? And where do I research the necessary wires I will need for installation?
Thanks
Last edited by Tyguy; 04-11-2007 at 11:03 PM.
04-12-2007, 09:08 AM
#3
Registered User
Join Date: Aug 2006
Location: Virginia
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Gives it a nice clean look. Where are you mounting the amps? You are going to need a Line Out Converter so the amp can receive sound from the radio.
Last edited by Thack; 04-12-2007 at 09:11 AM.
04-12-2007, 12:39 PM
#5
Deals on wheels
Get the more powerful amp definatly but DO NOT get a refurbished one.
Other than that everything looks good.. just do alot of research on here and make sure you have everything you need before you start.
Other than that everything looks good.. just do alot of research on here and make sure you have everything you need before you start.
04-12-2007, 01:52 PM
#7
Registered User
Join Date: Mar 2004
Location: Houston, TX
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
look at the recomended power for the subs 250 watts RMS. if you run two subs you will go to 2 ohm load and split the power between the subs. so you want an amp that puts out 500 watts class D at 2 ohms.
http://mobile.jlaudio.com/products_s...php?page_id=35
http://mobile.jlaudio.com/products_s...php?page_id=35
04-12-2007, 01:52 PM
#8
Registered User
Join Date: Aug 2006
Location: Virginia
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
I believe it is. If the person on ebay has ALOT positive feedback and little to none negative then i shouldnt matter. Definately do your research on here and feel free to ask questions. This stuff aint too tough.
Last edited by Thack; 04-12-2007 at 01:54 PM.
04-12-2007, 02:02 PM
#10
Registered User
Join Date: Mar 2004
Location: Houston, TX
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
instead of ebay why not just go to the guys website i have bought from them b4
http://www.sonicelectronix.com/
the 60o watt matches your needs better
http://www.sonicelectronix.com/item_...r+KX600.1.html
http://www.sonicelectronix.com/
the 60o watt matches your needs better
http://www.sonicelectronix.com/item_...r+KX600.1.html
04-12-2007, 02:55 PM
#12
Registered User
Join Date: Mar 2004
Location: Houston, TX
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
the alpine has LOC's built in which, all though i can ot speak to their quality. i have seen one install in an 8 with alpine bass amp.
http://www.sonicelectronix.com/item_...+MRP-M650.html
http://www.sonicelectronix.com/item_...+MRP-M650.html
Thread
Thread Starter
Forum
Replies
Last Post
philip53
RX-8 Parts For Sale/Wanted
1
07-30-2015 04:18 AM