Originally Posted by NgoRX8
(Post 2284643)
i dont see the placement of the detector helpful for passengers in bright sunlight though.
Originally Posted by Wind Dance
(Post 2284707)
What was used to wire in your power source?
Originally Posted by Wind Dance
(Post 2284913)
Hope you don't mind me taking your idea.
|
I put mine in this past friday night using mounting bracket from countryjoycrafts.com
I bought the basic hardwire kit without the smartcord attachment. I simply ran the wire under the headliner, down the pillar, under the dash and tapped into the cigarette lighter using the wire clip they provided. |
Originally Posted by azlizard
(Post 2294509)
I put mine in this past friday night using mounting bracket from countryjoycrafts.com
I bought the basic hardwire kit without the smartcord attachment. I simply ran the wire under the headliner, down the pillar, under the dash and tapped into the cigarette lighter using the wire clip they provided. I was wondering if it was long enough to reach the cig. wires Any chance you can get pictures of what color the wires are that you tapped? |
there are 2 wires on the lighter. 1 is yellow and the other is black with a red stripe. The yellow one was the power. Hopefully yours are the same but I can get a picture for ya, only take a couple minutes to pull things apart.
|
Originally Posted by azlizard
(Post 2294646)
there are 2 wires on the lighter. 1 is yellow and the other is black with a red stripe. The yellow one was the power. Hopefully yours are the same but I can get a picture for ya, only take a couple minutes to pull things apart.
just wonder.. you have been here longer than me but only 7 post? |
Don't know what's up with the post count.
|
ok here ya go. the yellow wire is in the top left corner. The blue clip came with the hardwire kit and is the power source for the radar dector. you just need to put the ground wire on one of the screws in the center console. Sorry about the blury picture, it was hard to hold the lighter and get a picture that close to focus.
http://i112.photobucket.com/albums/n...s/100_0618.jpg and here's a picture of the detector installed using the bracket and the wire coming out from the head liner by the rearview mirror http://i112.photobucket.com/albums/n...s/100_0621.jpg |
Thankie Thankie :)
|
azlizard: is the radar 'bouncing' up and down as you drive?
|
A little but not all the time, can't do much about it cause it's just a thin piece of metal that sides in the slot. Would have been nice if escort came up with a better quick release mount.
|
One trick to stop it from bouncing is to take advantage of the fact that our mirror is double hinged. Adjust the mirror so the bottom if it rests on the detector and then adjust upward. (see my pic)
p.s. this is easier with homelink but I think it might still be possible with yours |
Finally got my new toy.. Escort 8500x50 and did a similar install.
http://www.tradebit.com/usr/chinky559/pub/8/radar2.jpg Wired down the dash.. http://www.tradebit.com/usr/chinky559/pub/8/radar3.jpg Driver's view... http://www.tradebit.com/usr/chinky559/pub/8/radar4.jpg My direct-wire setup.. through the ash try and concealed. [edit] i think i broke my ashtray lid :( Anyone know how much they go for??? |
not sure how much they go for; check with Paul @ Mazmart
|
Originally Posted by Jedi54
(Post 2296067)
One trick to stop it from bouncing is to take advantage of the fact that our mirror is double hinged. Adjust the mirror so the bottom if it rests on the detector and then adjust upward. (see my pic)
p.s. this is easier with homelink but I think it might still be possible with yours |
azlizard, Is that a standard (non-Homelink) mirror? My main concern with this is that there would not be enough clearance to flip the day/night lever.
|
My mirror is standard and it does interfere a little but I'm ok with that.
|
Originally Posted by azlizard
(Post 2305342)
My mirror is standard and it does interfere a little but I'm ok with that.
Other ways you can work with it is bend the piece holding the radar on and move it towards the mirror. |
Originally Posted by azlizard
(Post 2305342)
My mirror is standard and it does interfere a little but I'm ok with that.
|
Originally Posted by NgoRX8
(Post 2304648)
haha i remember doing this for u! :lol:
|
Originally Posted by Wind Dance
(Post 2306342)
Hey which bolt did use to tap into the ground with?? I used the one right beneath the heated seat switches and now my car is dead.. Not sure if the grounding is bad or what not. :uhh:
|
Originally Posted by azlizard
(Post 2307825)
I think that's the same one/area I used , right behind the shifter although I don't have the heated seat switches.
|
I just installed my mount the other day...works great and I'm glad to not have to chase suction cups anymore!
|
Originally Posted by Oranje
(Post 2284208)
Here's another idea versus hanging it so low on the mirror and in plain view ...
|
http://img2.putfile.com/thumb/3/7816574762.jpg
http://img2.putfile.com/main/3/7816574786.jpg Jealous? Yeah that's right.....:lol2: |
that's bitchin'!
|
All times are GMT -5. The time now is 01:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands