problem with headunit/ac control and lcd screen!!!
#26
What do you mean you don't know what to do anymore!!!
How about doing what I suggested earlier and remove the HU and check the connection?
You might have just gotten lucky when you pushed on the right side and it came back on.
If the connector was indeed loose, it would have been only time before it came out again.
How about doing what I suggested earlier and remove the HU and check the connection?
You might have just gotten lucky when you pushed on the right side and it came back on.
If the connector was indeed loose, it would have been only time before it came out again.
Im just scared if I take out the HU, the CD, Radio and everything on it stops working! cuz i read couple of comments about it, some tried to take out the HU to install stuff, they messed it up somehow, what do you suggest?
#27
Grasshopper
iTrader: (1)
Even if you LCD unit is bad, you still need to remove the HU anyway to reach the connector behind the HU.
So either way, you need to remove it.
Follow the link I posted earlier that had a great DIY on how to remove it and you'll be fine.
Not saying its simple because it can be a PITA if you've never done it before.
The two connectors behind the temp controls are a little awkward to get at since you need to push in the tab and pull down (while your wrist is twisted).
Then when you pull the HU out it feels like you're about to break it in half, but you really need to wiggle and pull hard to get it out.
And don't forget about the "hidden bolt".
Again, print out the DIY, follow it, and take your time.
So either way, you need to remove it.
Follow the link I posted earlier that had a great DIY on how to remove it and you'll be fine.
Not saying its simple because it can be a PITA if you've never done it before.
The two connectors behind the temp controls are a little awkward to get at since you need to push in the tab and pull down (while your wrist is twisted).
Then when you pull the HU out it feels like you're about to break it in half, but you really need to wiggle and pull hard to get it out.
And don't forget about the "hidden bolt".
Again, print out the DIY, follow it, and take your time.
Thread
Thread Starter
Forum
Replies
Last Post
xAgyex
Series I Trouble Shooting
19
11-13-2023 07:51 AM
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM