Someone with more electronics experience should figure this out. We already have a thread dedicated to shipping one cable around the country and beyond to avoid spending $50, why not have one dedicated to figuring out how to make one ourselves?

I know enough to make the cable, just not enough to figure out how to design it lol... (majoring in Computer Science, not Computer or Electrical Engineering).

 

Hey guys,

I did some research online, and from the posts that you guys posted I have come down to this..

Were gonna need a SFE FTDI USB, NOT a regular USB Cable.. This cable has an integrated chip that outputs 6 pins, such as this image below.



Now in order for us to make a cable, were gonna need to have the wires in this order:


Black - Yellow - Orange - Red

or

GND - RXi - TXo - +5V

If someone happens to have a FTDI USB cable lying around, and wants to wire it up and give it a shot that would be awesome! I about to order a module right now,

http://www.robotshop.us/SFE-FTDI-USB...m_campaign=jos

but it wont be in till Monday or Tuesday so I wont have an answer till next weekend.. This is the cheapest method I found, so Im gonna try to wire mine up and flash my Axxiss and see if it works!

Good luck!

 

You are awesome! How much was that piece of hardware?

Let me know how it works out

 

At this rate I'll have the cable in a year!! Especially with it going back and forth across the country. Interested to see if tamz can rig something up.

 

just to keep things up to date, prosk8er735 - do you still have the cable?

 

The part was only 15$ (although shipping was another 15) but hopefully itll work and ill have myself a 30$ cable, instead of 50, that ill start shipping around! I still havent recieved a tracking number, but ill keep you guys posted with the updates!

 

Hey guys..
Chip came in today! Gonna do the soldering at work tomorrow and TRY to flash it tomorrow evening (if I get the chance, and nothing else comes up..)

Keep you all posted tomorrow night!

 

I think he still had it... he sent me a PM saying he was hoping to send it to me soon and that was maybe a week ago.

 

Hope it works!!

 

Soldered and ready for testing in about 3 hours! Im excited to see how it goes! Results soon to come...

 

u guys still shiping that update cord around ??? i have ben so busy since instaling my metra kit i havnt even ben worries about fixing my timekeeping issue but now i read this am interested in fixing the issue

 

hey guys sorry i havent been keepin up with the this i shipped out the cable already to ZMNRX8 so he should be recieving it works been really busy lately so i havent had much time to check in here and my work schedule isnt very post office friendly either

 

Awaiting test results!!!!

 

It works!!

The cable worked flawlessly.. I would say it requires a bit more knowledge than the normal cable. You will need to install drivers for this cable, and I had to end up bending the pins on the board a little bit because the cable I made doesnt fit in flawlessly.. I took some pics which ill post tomorrow.

Im ready to ship the cable out to the next person in line! This is what I did.

1) Plug in USB cable to the computer, BUT NOT TO THE METRA AXXESS, and tell windows to search for drivers in the drivers folder "located on the CD I burnt"
2) Install "Metra Installer.exe" and run it
3) Install Boot Updateder
4) Start Boot Updater, click start update
5) NOW plug the cable into the AXXESS box *****YELLOW WIRE IS ON THE INSIDE OF THE BOARD, RED WIRE IS ON THE OUTSIDE****** THIS IS VERY IMPORTANT!!!
6) Let it load, and you are done!!

Feel free to ask questions! And PLEASE guys, this is NOT the normal cable.. Only ask for it if you are confident with your skills..

Write your names down in a list IF YOU FEEL CONFIDENT WITH MY CABLE, and I will ship the cable as soon as the list is ready and I get the first person's address!

The hardest part was getting to the box.. The flash took less than 3 minutes..

 

1. mkmike103 - Buffalo, NY

 

PM me your address Mike! I knew you would be the first to post.. Just had to be fair and start a list..
Will ship it on Monday to make sure the time is kept right over the weekend..

 

PMed, will keep an eye out for it next week

 

wait wasnt there already a list??? and i thot i was next in line too!!! ahh wat happened???put me in there


o nvmm...

add me to list, if i you can send me this once your done mike...sounds simple enough.

 

Sorry for cutting the corners, but Im starting a new list because this cable isnt the same as the stock one.. I dont want someone to get a hold of it and then not know how to use it, so I started a new list for people that feel confident about it..

Its not rocket science or anything at all, and for anyone thats fairly tech savy, its a piece of cake.. But I just didnt want the cable landing in someones hands and they have no clue what to do with it since it looks retarded with a whole bunch of solder and an exposed Mini PCB..

 

sombody put me on one of the lists , my clock and temp are wrong wrong wrong and i want them right right right lol

 

No problem, I paypal'ed tamz 10 bucks to cover the shipping. I can send you my paypal address once I receive the cable so I know your address. I can promise turnaround time will be a day tops once I receive it, so none of this one member a month crap

Update the new list for the new cable so there is some sort of order.

 

dupe post

 

Just wanted to say I received the cable from Prosk8er yesterday afternoon. Hopefully I'll get it done tonight or tomorrow and will be able to send to whoever is next. Once I finish I'll get in touch with them.

 

Good to Hear that the cable is still going around

 

Ok... I got the cable the other day and updated my box last night. Worked great!! Here is the list for the first cable but not sure if this has changed since there is now another cable going around. So who's next?!?! I thought lokal was next... if so PM me your address and I can send it out tomorrow.

ZMNRX8 - VA (I have the cable)
lokaldisruption - CA
mr80 - CA
Scotchee - MD
tamz273 - MA
mkmike - NY
Double Down - MO
mbentley - IN
iemdan - CT