Lilliput 629 Software problem
#1
Rotor User
Thread Starter
Join Date: Nov 2007
Location: Sweden
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Lilliput 629 Software problem
I'm just putted in a carpc and everything works great except one annoying thing... I can't get that damn touchscreen to work. The monitor works fine but no clikely-click. using a keyboard all the time gets old quick
I tried to search this site and google etc but can't seem to find anybody else that has/had problems with it... So whats the magical thing to do to get it work?
Software is installed and touchscreen device is ok in the task manager.
I tried to search this site and google etc but can't seem to find anybody else that has/had problems with it... So whats the magical thing to do to get it work?
Software is installed and touchscreen device is ok in the task manager.
#2
hakuna matata!
iTrader: (41)
You might want to try mp3car.com as this is a niche problem and not something many people here would know to troubleshoot.
With that said, I used a 629 for my former carpc build.
Are you using an extension to get the touchscreen usb cable to the pc? Is it plugged into a hub or directly onto a USB port on the motherboard?
With that said, I used a 629 for my former carpc build.
Are you using an extension to get the touchscreen usb cable to the pc? Is it plugged into a hub or directly onto a USB port on the motherboard?
#3
Zoom-Freakin'-Zoom
iTrader: (5)
You might want to try mp3car.com as this is a niche problem and not something many people here would know to troubleshoot.
With that said, I used a 629 for my former carpc build.
Are you using an extension to get the touchscreen usb cable to the pc? Is it plugged into a hub or directly onto a USB port on the motherboard?
With that said, I used a 629 for my former carpc build.
Are you using an extension to get the touchscreen usb cable to the pc? Is it plugged into a hub or directly onto a USB port on the motherboard?
what al said.. searching for drivers is what used to end up fixing it..
out of the loop now. but i do have that obscure long cable!
beers
#5
Rotor User
Thread Starter
Join Date: Nov 2007
Location: Sweden
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I know its a long shot but its seems to be common in carpc building here. =)
checked mp3car and got some ideas, maybe I installed some wires wrong when I putted it into the OEM GPS House.
Im using extension high end USB cabel, the screen is in OEM GPS House and the computer in the trunk. No USB Hub, its connected directly to the motherboard.
The Device manager finds it and it is a touchsceen device under "mouses". everything seems to be correct, if I try a 4 point calibration it dosent complain but nothing happens when I touch the screen.
Im thinking its a hardware problem after reading on mp3car, well well taking all down again will be fun.
Thanks for the tips.
checked mp3car and got some ideas, maybe I installed some wires wrong when I putted it into the OEM GPS House.
Im using extension high end USB cabel, the screen is in OEM GPS House and the computer in the trunk. No USB Hub, its connected directly to the motherboard.
The Device manager finds it and it is a touchsceen device under "mouses". everything seems to be correct, if I try a 4 point calibration it dosent complain but nothing happens when I touch the screen.
Im thinking its a hardware problem after reading on mp3car, well well taking all down again will be fun.
Thanks for the tips.
Last edited by fastlaneracing; 05-02-2010 at 01:17 PM.
#6
Registered
iTrader: (1)
Join Date: May 2008
Location: Chandler, AZ
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Do you see your mouse arrow in the middle of the screen when the computer starts up? What about if you connect an actual USB mouse to the computer at the same time, does that work or does it keep getting dragged into one corner?
You might have the screen pressed too tightly against the OEM housing, causing a permanent 'touch' in one of the corners.
You might have the screen pressed too tightly against the OEM housing, causing a permanent 'touch' in one of the corners.
Thread
Thread Starter
Forum
Replies
Last Post
ShellDude
RX-8 Parts For Sale/Wanted
5
10-01-2015 09:55 PM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM
pdxhak
General Automotive
7
09-22-2015 07:39 AM
629, 629fgl, audio, calibration, car, lilliput, llc, pc, point, problem, software, touchscreen, troubleshott, work