Info on how to connect Jl Audio 500/1 amp
#1
kanedrz
Thread Starter
iTrader: (2)
Join Date: Jul 2007
Location: port chester, ny 10573
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Info on how to connect Jl Audio 500/1 amp
I would like instructions on how to connect my JL Audio 500/1 sub amp and where will it be a good place to put my ampin my RX8. I have a Zenclosure custom sub box for my 10inch JL Audio W7, I also need to know, before I screw on the sub to the box, if I have should stuff the sub-box with foam in order to sound better, if so what kind of foam? Here is a list of what I have to use for the amp connections.
*18 Feet 4 Gauge (AWG) Metallic Blue KLM Power Wire
*3 Feet 4 Gauge (AWG) Silver Pearl KLM Ground Wire
*One inline fuse holder with 80A AGU Fuse
*One 5 Meter eKo InterKonnect Blue OFC RCA Cable with Built in Turn On lead
*10 Feet BLUE Klear Kable OFC 16 Gauge Speaker Wire
*2 Gold Plated 4 AWG Ring Terminals, 2 Gold Plated 4 AWG Spade Terminals
If there is anything else I would need please let me know. Thanks for your time.
*18 Feet 4 Gauge (AWG) Metallic Blue KLM Power Wire
*3 Feet 4 Gauge (AWG) Silver Pearl KLM Ground Wire
*One inline fuse holder with 80A AGU Fuse
*One 5 Meter eKo InterKonnect Blue OFC RCA Cable with Built in Turn On lead
*10 Feet BLUE Klear Kable OFC 16 Gauge Speaker Wire
*2 Gold Plated 4 AWG Ring Terminals, 2 Gold Plated 4 AWG Spade Terminals
If there is anything else I would need please let me know. Thanks for your time.
#2
g'day,
I have my 500/1 in the lowered section of the boot...there have been many such installs with some good pics posted up. If you do a search for 500/1 you will get a couple of hits...
One thing you are going to need in addition to your install kit is a speaker wire to RCA adaptor. JL sell them or you can make your own. Also you might decide to get a LoC but I dont believe our amps need it, although others might have a different opinion. Some rubber gromets also make routing cable into the boot nice and neat
The sticky(s) in this section cover pretty much everything else regarding wiring...awesome resource!!
Good luck!
I have my 500/1 in the lowered section of the boot...there have been many such installs with some good pics posted up. If you do a search for 500/1 you will get a couple of hits...
One thing you are going to need in addition to your install kit is a speaker wire to RCA adaptor. JL sell them or you can make your own. Also you might decide to get a LoC but I dont believe our amps need it, although others might have a different opinion. Some rubber gromets also make routing cable into the boot nice and neat
The sticky(s) in this section cover pretty much everything else regarding wiring...awesome resource!!
Good luck!
Last edited by RNE515; 08-04-2007 at 03:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
{WTB/WTT} WTB Right Undertray Riser and Guard
archon
RX-8 Parts For Sale/Wanted
3
10-01-2015 06:08 AM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM