Info on how to connect Jl Audio 500/1 amp
 

I would like instructions on how to connect my JL Audio 500/1 sub amp and where will it be a good place to put my ampin my RX8. I have a Zenclosure custom sub box for my 10inch JL Audio W7, I also need to know, before I screw on the sub to the box, if I have should stuff the sub-box with foam in order to sound better, if so what kind of foam? Here is a list of what I have to use for the amp connections.

*18 Feet 4 Gauge (AWG) Metallic Blue KLM Power Wire

*3 Feet 4 Gauge (AWG) Silver Pearl KLM Ground Wire

*One inline fuse holder with 80A AGU Fuse

*One 5 Meter eKo InterKonnect Blue OFC RCA Cable with Built in Turn On lead

*10 Feet BLUE Klear Kable OFC 16 Gauge Speaker Wire

*2 Gold Plated 4 AWG Ring Terminals, 2 Gold Plated 4 AWG Spade Terminals

If there is anything else I would need please let me know. Thanks for your time.

g'day,

I have my 500/1 in the lowered section of the boot...there have been many such installs with some good pics posted up. If you do a search for 500/1 you will get a couple of hits...

One thing you are going to need in addition to your install kit is a speaker wire to RCA adaptor. JL sell them or you can make your own. Also you might decide to get a LoC but I dont believe our amps need it, although others might have a different opinion. Some rubber gromets also make routing cable into the boot nice and neat :D:

The sticky(s) in this section cover pretty much everything else regarding wiring...awesome resource!!

Good luck!