fd3s777

iTrader: (2)

Check out these guage pods for our RX-8. They have 2 versions. One require cut the dash cover and the other is direct bolt on. I personally like the cut dash one. They will work with any 52mm guages. These are for left hand drive only. Here are some pics.

Mindtrip

Any pics of it installed?

zoomzoom_8

who offers these, is there a website so we can see price etc.? thanks

Chris

said7

???

looks cool can we get them?

adrian-1

Yes, they're available.
I've ordered the version 1 (first 2 pics, must cut dash). It should arrive soon and I'll post pics once I install it. I'll do a DIY also for those wondering how to put it in.

Due to forum rules, I can't disclose the price here.
PM fd3s777 for info.

rkostolni

Who sells these?

adrian-1

It's from http://www.evo-r.net/ they're located overseas.

I got my pod in today and started to install it. It looks to be made out of fiberglass and is very strong. Again this is the version 1 pod and you have to cut the dash.

I was hoping to install it parrallel to the dash but due to it's shape it can only go in slanted. See picture.

adrian-1

more pics.

I will probably receive my 52mm gauges with 3-4 weeks and I'll update then.

EyeBall Fixer...(o)(x)

These look pretty sharp...
It'll be nice to see pix of installed product..
The model looks kind of shinny and smooth textured compared to our dash.

Lock & Load

Could these pods be adopted in anyway to Right hand drive cars ??


cheers
michael

SHOWOFF

I didn't see it anywhere on their site.

adrian-1

I highly doubt it. Here's their preproduction piece and it was made for left hand drive vehicles. The contour would be different plus the left end is shorter than the right end.

SHOWOFF

Here let me host those for you, photobucket says bandwidth exceeded.

adrian-1

Contact fd3s777 by PM and he'll give you ordering info. I think it's still new and about to be listed.
I can't discuss the price it cost, but it was much, much cheaper than the PTP one or the Mazdaspeed gauge kit one.

Lock & Load

Adrian 1

Thanks we here in Australia always seem to get snookered , little is available to right hand drive and when it is the exchange rate and impot duty gives it to us up the rear

Reiv racing beat intake even if you bring it in whitout paying duty approximately $550.00 compared to your $320.00

cheers
michael

fd3s777

iTrader: (2)

Sorry don't have them for RHD. But I know they sale exact same style as our TYPE II in Japan.
Intake? hehe... I will have new carbon fiber intake system ready in June. Dynoed at 10 HP gained. (Similar to autoexe RAM air system)

Lock & Load

Does it have a cold air ram intake??


cheers
michael

fd3s777

iTrader: (2)

Of course. It's a full kit.

zoomzoom_8

Just got my gauge pod from fd3s77. Easy transaction with no trouble. i got version two,the bolt on. (the second set of pictures). Came just as promised and as Adrian said up above in the thread, seems to be a quality piece, very sturdy. I however have the Defi Bf gauges (60 mm) and will have to modified the holes slightly to get my gauges fit, but it can be done easily with a dremel or like tool. There is enough lip around the holes that once that is finished, you will never be able to tell that the holes were modified. I may start work on mine today and when finished will post a DIY and if anyone needs any help with verision 2, just post or pm me as there were no instructions. Off to the garage!

chris

fd3s777

iTrader: (2)

Chris,

Hope to see installed pics. Glad you like it!

- Jay

BlueRenesis82

The 60mm gauges fit? Please post pics, I need to buy one of these if that is the case!

zoomzoom_8

Yeah, go ahead and buy it while they still have some! I got to work on mine some today and with a little grinding with the dremel it is no problem at all. Once th gauge (DEFI BF for me) is placed in the hole, the gauge bezel covers any imperfections from the mod. Looks really nice. I am working on installing mine, so far have modified the holes to fit 60 mm, and drilled the pilot holes for the screws (i have v 2). i am going to post a DIY when I am all finished, hopefully just a day or so more. Also wanted to pass along, the screws that hold this in place can be covered with a 50 cent screw cover (black) that can be purchased at home depot or Lowe's so it makes for a clean and neat install. so to sum it up, buy it! DIY will be up soon!

Chris

adrian-1

Update on version 1 pod.
I did not know how to attach the pod to the dash so I took it to my local bodyshop and they used some black silicone stuff. They charged me $30.
I'm still waiting for the gauges to come in. They're the Defi Link meter ones (not BF) in 52mm and black face w/ an adjustable red arrow on the bezel. Getting EGT, water temp, oil pressure.

army_rx8

so this guage pod will only fit 52mm guages..too bad i woudl move my guages off my a-pillar if it woudl fit 60mm...damn you defi bf guags DAMN YOU...ah well i cna't stay mad at them..they are damn pretty :D

fd3s777

iTrader: (2)

looks good adrian.