My RX8 is not not equipped with the Navigation Hood therefore I am trying to connect the hood from scratch and if possible without a custom PCB.

I have connected wires as per attached pic however it seems that the hood opens when pressing the open button, however if I press the open button again the hood will not close. Also the tilt button will not work.

Has anyone ever had this kind of issue?

 

I dont see anything in that image for the button signal.

 

You also need to power 1O (ACC)

if that does not work, you may have messed up the calibration.

 

calibration is off

 

Disconnected the calibration sensor connecter and connected it again .... now it works fine! Thanks for the help.