RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Interior, Audio, and Electronics (https://www.rx8club.com/series-i-interior-audio-electronics-24/)
-   -   Calling all Shift Knobs (https://www.rx8club.com/series-i-interior-audio-electronics-24/calling-all-shift-knobs-223172/)

youngsoldier777 09-23-2013 12:33 AM

RotaryTherapy, did the cobb screw on the oem post well? no jiggles??

Fister_Roboto 09-25-2013 05:31 PM

I want a shift knob that is the same shape and size as the stock unit, but heavier. I'm thinking of taking a stock shift knob to a machine shop and seeing if they can make me one out of brass.

reaper76 09-30-2013 12:43 PM


Originally Posted by youngsoldier777 (Post 4526502)
RotaryTherapy, did the cobb screw on the oem post well? no jiggles??

It's a solid shifter knob it screws down tight and flush with no wiggle or jiggle at all!

fixitall 07-15-2014 07:19 AM

No more pictures? What are others replacing the OEM knob with when the plastic begins to chip and crack?

200.mph 07-15-2014 07:29 AM


Originally Posted by fixitall (Post 4614265)
No more pictures? What are others replacing the OEM knob with when the plastic begins to chip and crack?

check out rotaryfx

fixitall 07-23-2014 07:57 AM


Originally Posted by 200.mph (Post 4614273)
check out rotaryfx

Good tip - I like the OEM knob and adding the stainless cap to the top would solve the problem I have.

Anyone who's done it want to chime in on that? Does the cap fit well over the plastic piece and have a comfortable feel when installed?

Right now I am irritated by a sharp edge from a crack in the plastic rotor shape on top of the OEM knob. I'd be disappointed if the stainless cap simply presented uncomfortable edges all around by sitting up too high on the top of the knob.

KuroSama 10-09-2014 05:29 AM

Did someone say "heavy"?
 
1 Attachment(s)

Originally Posted by Fister_Roboto (Post 4527567)
I want a shift knob that is the same shape and size as the stock unit, but heavier. I'm thinking of taking a stock shift knob to a machine shop and seeing if they can make me one out of brass.

I have a nice weighted NRG knob that I bought about 5 years back. The bad news is that it's universal, so you have to mess around with inserts, but the good news is it's universal, so I've used it in every car I've owned since (AW11 MR2, GC Impreza, and now the RX-8). Shifts become smooth as butter, and I've never had any transmission issues due to its weight. I would suggest the Race Roots Synchro Saver however, if you are going to use a weighted knob, just to decrease the chances of possible wear.

EDIT: Added picture. This car was a gift to myself when I made Chief, so it is thus appropriately festooned.

Attachment 220682

rightious300 04-08-2015 09:24 PM


Originally Posted by flyinglizard (Post 4295591)

Did you have any problems at all with the boot fitting snug, and does it ever spin?

georx8 04-09-2015 04:23 AM

1 Attachment(s)
oem carbon fiber knob

Attachment 219649

9krpmrx8 04-09-2015 03:54 PM

Clean gauge install but i don't know how you do it without the AC vents.

georx8 04-10-2015 03:31 PM


Originally Posted by 9krpmrx8 (Post 4679312)
Clean gauge install but i don't know how you do it without the AC vents.

I never used the center vents anyway.
:cool:

9krpmrx8 04-10-2015 03:45 PM


Originally Posted by georx8 (Post 4679741)
I never used the center vents anyway.
:cool:

Lucky. Those vents are crucial in South Texas, :lol:

aorkennykiller 02-25-2016 10:30 AM

Hey wasn't sure if i was supposed to make a new thread or revive an old one. Has anyone tried using the S2000 shift knob in the 8? I know there is a thread difference and was wondering if using something like this would do the trick.
Brass Shift Knob Thread Reducer Adapter Insert M12x1 25 OD M10x1 5 ID | eBay

Trying to look for a new shift knob lol

9krpmrx8 02-25-2016 10:40 AM

Why would you bother hassling with an S2000 knob?

aorkennykiller 02-25-2016 10:43 AM


Originally Posted by 9krpmrx8 (Post 4746918)
Why would you bother hassling with an S2000 knob?

Just have always been a fan of they way they look and feel. I've been considering the Cobb shifters that were posted in this thread as well as this one:
i'm just worried that the weight difference between the momo and the stock would be too big. Trying to see what options i have in terms of fitment and aesthetics

9krpmrx8 02-25-2016 10:50 AM

Knobmeister.com - Home

I love my Voodoo knob and the support is second to none. When the clear coat on mine started to fail after a few years they mailed me a new that day without even asking for mine back.

Trancemission 02-25-2016 11:40 PM


Originally Posted by georx8 (Post 4679042)

Im in love. :eek: is that vinyl or real carbon around your navi??

ZoomEricZoom 02-29-2016 12:18 AM

^No way it's legit carbon fiber.. Too expensive. Usually interior carbon fiber stuff is just cheap plastic and probably off of eBay.

Trancemission 02-29-2016 01:28 AM


Originally Posted by ZoomEricZoom (Post 4747418)
^No way it's legit carbon fiber.. Too expensive. Usually interior carbon fiber stuff is just cheap plastic and probably off of eBay.

Evo R sells alot of carbon fiber trims for the interior. Thats why i was asking because 80$ would be way too much for just plastic

RXeligion 02-29-2016 02:22 AM


Originally Posted by 9krpmrx8 (Post 4746924)
Knobmeister.com - Home

I love my Voodoo knob and the support is second to none. When the clear coat on mine started to fail after a few years they mailed me a new that day without even asking for mine back.



Custom engraving!? I was looking for something somewhat upscale, but this has potential!

9krpmrx8 02-29-2016 11:18 AM


Originally Posted by Trancemission (Post 4747425)
Evo R sells alot of carbon fiber trims for the interior. Thats why i was asking because 80$ would be way too much for just plastic


EVoR's customer service is the worst, ordering from him is a crap shoot.

Trancemission 02-29-2016 03:33 PM

https://cimg5.ibsrv.net/gimg/www.rx8...b75d9005c1.jpg



Love this new shift knob

Jvswan 03-27-2016 08:09 PM

Shift Knobs
 

Originally Posted by Trancemission (Post 4747579)

I really like this knob. What kind is it? Where did you get it?

Trancemission 03-28-2016 12:12 AM


Originally Posted by Jvswan (Post 4752845)
I really like this knob. What kind is it? Where did you get it?

it's a carbon fiber RE Amemiya shift knob. I forget the site I got it from. I think it was nengun

Setflyn41 06-02-2016 08:53 PM

So far I've had a razo shift knob and I hate it and also now have a voodoo magnum but I'm not a fan of it either it doesn't seem to screw all the way down onto my short shifter leaves probably 1/4" to 1/2" of space. I was thinking of a cobb but I don't think I like the ball design I don't think I'll be happy 'til I bite the bullet and spend too much on a stock knob in good shape


All times are GMT -5. The time now is 10:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands