Awesome lurch, thanks.

 

That's a lot of work just to have auto up haha.

 

i hooked mine up so i could also control the windows from my aftermarket alarm, and that was the really time consuming part

 

Could this work with the factory alarm?

 

i do not believe so

 

With the proper relays, I don't see why not. It certainly wouldn't be easy, and you'd need to have quite a bit of electronic knowledge.

 

Hmm I might consider this, it would be a cool thing to have.

 

Hi Lurch,
Will you check my list and tell me if it's correct?
Thanks again.


Drivers Window Up
Cut Yellow w/Green
Connect From 530T
H1 Blue to Motor side
H2 Brown to Switch side

Drivers Window Down
Cut Red w/Black
Connect From 530T
H1 Green to Motor side
H2 White to Switch side

Passenger Window Up
Cut Green w/Black
Connect From 530T
H1 Blue w/Black to Motor side
H2 Brown w/Black to Switch side

Passenger Window Down
Cut Green w/White
Connect From 530T
H1 Green w/Black to Motor side
H2 White w/Black to Switch side

12V (+) Power
Green w/Yellow
H1 Red
Ground (-)
Black w/White
H1 Black
H1 Violet
H1 Violet w/Black

 

yup, looks correct here
and no to the sunroof

 

keep in mind, if you are planning on hooking up the power windows to an aftermarket alarm to be able to control them from said alarm, that power source will not work as it only has 12v when the key is on

 

The power locks have voltage when the car is off. Could you wire it there instead?

 

power door locks are a negative trigger, so probably not. i used the 2 orange wires at the amplifer in the door for constant power

 

Thanks Lurch for your detailed instructions, my install went flawlessly.
The only thing I didn't do is install the auto-down connection for the drivers door
since we already have this feature. I may run those wires over to the passengers door
to give it an auto down feature.