Any help would rule!
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: Diamond Bar, CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Any help would rule!
Ok, I just added an amp and subwoofer to my 8 just to add a little kick to the music, and the subs are not working. I followed exactly what was shown in a DIY thread I found on this forum.
I am basically running 2-10" jlw6 (old version) subs with a ppi pc275 amp and tapping into my rear speakers using a PAC line output converter. The subs are wired in series and run at 6 ohms. All the other stuff is routine (ie. i used the 2nd cig. lighter as remote turn-on). The amp seems to be working since the light comes on when car is on. The only thing I can think of is a bad connection somewhere. Any input would be appreciated.
I am basically running 2-10" jlw6 (old version) subs with a ppi pc275 amp and tapping into my rear speakers using a PAC line output converter. The subs are wired in series and run at 6 ohms. All the other stuff is routine (ie. i used the 2nd cig. lighter as remote turn-on). The amp seems to be working since the light comes on when car is on. The only thing I can think of is a bad connection somewhere. Any input would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Touge
Canada Forum
1
09-23-2019 06:45 PM
Michael Bryant
Series I Wheels, Tires, Brakes & Suspension
5
10-12-2015 03:07 PM
Touge
Canada Forum
0
09-23-2015 10:51 PM
pdxhak
General Automotive
7
09-22-2015 07:39 AM
Touge
Canada Forum
0
09-01-2015 10:47 PM