Questions on installation of clear corners (I read the DIY)
#1
Registered
Thread Starter
Questions on installation of clear corners, why don't my signals work when locking/un
Hey guyz and girls
I did a search, couldnt find what i wanted to know. So i installed my clear corners, i bought it on ebay from japanparts and it came with corners, amber bulb, and the black socket that holds the bulb as well that you have to connect. I have no idea what it's called. I couldnt figure how to unplug the current one so i just switched the bulbs. Would this matter if i keep my old black thingy wire? The only problem i have is when i unlock my car, the corners are suppose to blink. But they don't do that anymore after i switched to the amber bulbs. Also, any suggestions on HOW TO Take the black harness off?? I tried for 15 minutes, and i couldnt unplug that stupid thing. Thanks for your responses.
I did a search, couldnt find what i wanted to know. So i installed my clear corners, i bought it on ebay from japanparts and it came with corners, amber bulb, and the black socket that holds the bulb as well that you have to connect. I have no idea what it's called. I couldnt figure how to unplug the current one so i just switched the bulbs. Would this matter if i keep my old black thingy wire? The only problem i have is when i unlock my car, the corners are suppose to blink. But they don't do that anymore after i switched to the amber bulbs. Also, any suggestions on HOW TO Take the black harness off?? I tried for 15 minutes, and i couldnt unplug that stupid thing. Thanks for your responses.
Last edited by whosyourbaba; 03-25-2004 at 10:06 PM.
#4
Registered User
I purchased the same clear corners from Japan Parts on eBay. What I did was keep the original harnass (the black thingy). As a matter of fact I kept the white bulb as well. Thought it looked better than the amber one. If you prefer the amber one, its pretty easy to just pull it out and switch. No issues.
#5
Mmmmm... Rotary Donut
Join Date: Nov 2003
Location: Lake in the Hills, IL (NW Chicago Burbs)
Posts: 2,376
Likes: 0
Received 4 Likes
on
2 Posts
Originally posted by Astor
You are mistaken, as mentioned, the corners never blink, just the signals.
You are mistaken, as mentioned, the corners never blink, just the signals.
#6
Registered
Thread Starter
ok, thanks a lot guys. I thought the harness would be a factor. About the signals going on when unlocking, and locking, it doesn't work anymore after i installed the clear corners. Any ideas? Sorry about thinking it was the corners. I just remember seeing the orange from the sides. It doesnt do it anymore. I didnt move any wires or anything. Thanks a lot for your reponses.
Last edited by whosyourbaba; 03-25-2004 at 10:05 PM.
#7
Mmmmm... Rotary Donut
Join Date: Nov 2003
Location: Lake in the Hills, IL (NW Chicago Burbs)
Posts: 2,376
Likes: 0
Received 4 Likes
on
2 Posts
Originally posted by whosyourbaba
ok, thanks a lot guys. I thought the harness would be a factor. About the signals going on when unlocking, and locking, it doesn't work anymore after i installed the clear corners. Any ideas? Sorry about thinking it was the corners. I just remember seeing the orange from the sides. It doesnt do it anymore. I didnt move any wires or anything. Thanks a lot for your reponses.
ok, thanks a lot guys. I thought the harness would be a factor. About the signals going on when unlocking, and locking, it doesn't work anymore after i installed the clear corners. Any ideas? Sorry about thinking it was the corners. I just remember seeing the orange from the sides. It doesnt do it anymore. I didnt move any wires or anything. Thanks a lot for your reponses.
#9
Mmmmm... Rotary Donut
Join Date: Nov 2003
Location: Lake in the Hills, IL (NW Chicago Burbs)
Posts: 2,376
Likes: 0
Received 4 Likes
on
2 Posts
Originally posted by whosyourbaba
Thanks a lot. Problems fixed, my trunk was open.
Thanks a lot. Problems fixed, my trunk was open.
It's your 8's little way of saying 'hey, you left a door open, dammit!'
#10
if your not 1st your last
Originally posted by MrDave
I purchased the same clear corners from Japan Parts on eBay. What I did was keep the original harnass (the black thingy). As a matter of fact I kept the white bulb as well. Thought it looked better than the amber one. If you prefer the amber one, its pretty easy to just pull it out and switch. No issues.
I purchased the same clear corners from Japan Parts on eBay. What I did was keep the original harnass (the black thingy). As a matter of fact I kept the white bulb as well. Thought it looked better than the amber one. If you prefer the amber one, its pretty easy to just pull it out and switch. No issues.
thankgod that isnt a turn signal:D
#11
Moderator with a mycocardium
Yep, same parts, it's just that the ones you bought were intended to be replacement parts for damaged corners. So, you did the right thing.
Mr.Dave I liked the white lamps too, but, in almost all states, the side markers must be amber on the front half, red on the back. Not that they will pull you over for such. I may eventually go back to the whites. I used amber LEDs just to be different.
Mr.Dave I liked the white lamps too, but, in almost all states, the side markers must be amber on the front half, red on the back. Not that they will pull you over for such. I may eventually go back to the whites. I used amber LEDs just to be different.
#12
Registered User
D MENAC, I have heard that about the amble lamps being required on the front. I believe CA is one of them....just wanted to see how long I can get away with white and no front license plate.
#13
They Come At Night
Join Date: Oct 2003
Location: Nashville, TN
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Mr.Dave I liked the white lamps too, but, in almost all states, the side markers must be amber on the front half, red on the back. Not that they will pull you over for such. I may eventually go back to the whites. I used amber LEDs just to be different. [/B][/QUOTE]
I put in ultra violet or blacklights in mine, when I was in that last wreck I asked the cop, he said as long as they weren't blue or red no problem.
I put in ultra violet or blacklights in mine, when I was in that last wreck I asked the cop, he said as long as they weren't blue or red no problem.
#14
if your not 1st your last
im still on temps but i might eat the tickets i get for the front plate.
only problem is by my house there is a cop that sits every morning just looking to pull someone over.and im expecting a ticket any day for the tints on my other car.
as for the white corner lights
i did one side with white other side orange and it looked better with the headlight parking light so i left them white.i doubt it cops will know its a new car im sure they wont care.
then again i could be wrong
only problem is by my house there is a cop that sits every morning just looking to pull someone over.and im expecting a ticket any day for the tints on my other car.
as for the white corner lights
i did one side with white other side orange and it looked better with the headlight parking light so i left them white.i doubt it cops will know its a new car im sure they wont care.
then again i could be wrong
Last edited by Kel Rx8; 03-25-2004 at 11:07 PM.
#15
Registered User
Originally posted by Astor
Mr.Dave I liked the white lamps too, but, in almost all states, the side markers must be amber on the front half, red on the back. Not that they will pull you over for such. I may eventually go back to the whites. I used amber LEDs just to be different.
Mr.Dave I liked the white lamps too, but, in almost all states, the side markers must be amber on the front half, red on the back. Not that they will pull you over for such. I may eventually go back to the whites. I used amber LEDs just to be different.
They look pretty sweet. Nice work.
#16
Moderator with a mycocardium
I put in ultra violet or blacklights in mine, when I was in that last wreck I asked the cop, he said as long as they weren't blue or red no problem. [/B][/QUOTE]
Pretty sweet looking.
Pretty sweet looking.
#17
Originally posted by D MENAC 7
... in almost all states, the side markers must be amber on the front half, red on the back. Not that they will pull you over for such.
... in almost all states, the side markers must be amber on the front half, red on the back. Not that they will pull you over for such.
(waiting on mine from CZ)
#18
Socially Distorted
Join Date: Nov 2003
Location: Camp Victory, Iraq
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by MrDave
I purchased the same clear corners from Japan Parts on eBay. What I did was keep the original harnass (the black thingy). As a matter of fact I kept the white bulb as well. Thought it looked better than the amber one. If you prefer the amber one, its pretty easy to just pull it out and switch. No issues.
I purchased the same clear corners from Japan Parts on eBay. What I did was keep the original harnass (the black thingy). As a matter of fact I kept the white bulb as well. Thought it looked better than the amber one. If you prefer the amber one, its pretty easy to just pull it out and switch. No issues.
Thread
Thread Starter
Forum
Replies
Last Post
Pelleilee
New Member Forum
6
09-29-2019 10:07 AM
cschoeps
RX-8's For Sale/Wanted
0
08-06-2015 12:44 PM
MolecularConcept
New Member Forum
15
08-05-2015 04:43 PM