painted stock rims pictures
#7
Registered Lunatic
iTrader: (1)
Hm... kudos for the work, but I don't think the stock wheels painted black look too good.
For some reason, all black wheels look like steelies to me. But as long as you like them it's all cool.
I think black rims (especially on the titanium gray) look good only if they are shiny and have a machined (silver) lip.
For some reason, all black wheels look like steelies to me. But as long as you like them it's all cool.
I think black rims (especially on the titanium gray) look good only if they are shiny and have a machined (silver) lip.
#12
#17
RX8 HA HA
#19
for paint i used a primer made for high heats from kragen auto parts. also theres a special spray paint from kragen i forget the name but it has a picture of a rim on it, because they are made for this high heat they undergo. and it took about 3 hours
#20
$200 and i'll do them for you...
our exact process:
jacked up one side of the car
took off two wheels
cleaned off all chemicals and dirt from the rim
using a low grade sand paper (320 i think) sand down the whole rim
we used notecards and placed them in the crevicce between the rim and wheel
then put a coat of primer on, wait 10-15 minutes to dry. then did anther coat.
after that drying, we used the rim spray paint and did about three coats.
**make sure to let them dry, and keep the can from spraying too close to the rim and causing dripping***
Thread
Thread Starter
Forum
Replies
Last Post
bulletproof21
RX-8 Parts For Sale/Wanted
6
10-20-2015 08:53 PM