MS Wing & bolt holes
#1
MS Wing & bolt holes
I did a search & didn't find any info. When I bought my 8 it had the factory wing on it. I was wondering if the MS wing will cover up the holes that were used to mount the factory wing or will it use the same holes?
Any help will be apprieciated.
Any help will be apprieciated.
#2
www.evoperform.com
Join Date: Apr 2005
Location: tax free delaware
Posts: 2,010
Likes: 0
Received 0 Likes
on
0 Posts
i cant see mazda putting a wing on the car, then selling the mazdaspeed wing and making you deal with holes that wont work for the mounting of the new wing
#3
Registered Lunatic
iTrader: (1)
Originally Posted by 8DZ
I did a search & didn't find any info.
I was wondering if the MS wing will cover up the holes that were used to mount the factory wing or will it use the same holes?
You may end up with some scratches to the trunk lid from the stock spoiler which won't be covered by the Mazdaspeed wing.
Also, it is possible that even though the MS wing will install fine using the original holes, it's base might still not line up properly with the trunk lid. This depends on whether the stock wing was installed correctly (according to the template) or not.
#4
Raced with Joy & Abandon
Join Date: Jul 2004
Location: Indy
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tamas
Also, it is possible that even though the MS wing will install fine using the original holes, it's base might still not line up properly with the trunk lid. This depends on whether the stock wing was installed correctly (according to the template) or not.
Mine definately didn't, and the last install post I saw when someone used the factory spoiler holes showed a gap from the underspolier and the trunk lid.
#7
One ball, corner pocket
Join Date: Apr 2004
Location: Fontucky, right next to Patriotville
Posts: 2,053
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Tamas
You obviously didn't search hard enough (or at all), since this topic has been covered multiple times already.
As it was posted numerous times, the MS wing will use two of the regular stock wing's mounting holes per side. The stock wing has three holes on each side - the third unused one will be covered by the MS wing, but it's a good idea to rustproof the hole anyway.
You may end up with some scratches to the trunk lid from the stock spoiler which won't be covered by the Mazdaspeed wing.
Also, it is possible that even though the MS wing will install fine using the original holes, it's base might still not line up properly with the trunk lid. This depends on whether the stock wing was installed correctly (according to the template) or not.
As it was posted numerous times, the MS wing will use two of the regular stock wing's mounting holes per side. The stock wing has three holes on each side - the third unused one will be covered by the MS wing, but it's a good idea to rustproof the hole anyway.
You may end up with some scratches to the trunk lid from the stock spoiler which won't be covered by the Mazdaspeed wing.
Also, it is possible that even though the MS wing will install fine using the original holes, it's base might still not line up properly with the trunk lid. This depends on whether the stock wing was installed correctly (according to the template) or not.
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 09:00 AM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM