mazdaspeed spoiler
#1
Boost needed
Thread Starter
Join Date: Dec 2003
Location: San Jose, CA
Posts: 2,557
Likes: 0
Received 0 Likes
on
0 Posts
mazdaspeed spoiler
i installed my spoiler no more than two weeks ago. but i noticed a gap.,when i open the trunk i notice the gap from the lower wing to the trunk, did i install it wrong if so how can i fix it? i tried to adjust it but it wouldn't budge...its stuck right on. what you suggest? anyone with a bottom angle picture from the bottom lip poiler to the trunk?
#2
Registered User
Join Date: Sep 2003
Location: Wichita, KS
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Can you post pics of yours?
I think mine is fine. I did the installation myself 2 months ago. I am not aware of anything usual yet.
On a side note, the paint on the spoiler is really thin. I didn't bother to wax the spoiler after I put it on. I was washing the car over the weekened and noticed that the paint at the front tip of the upper spoiler is wearing off. What the...
I think mine is fine. I did the installation myself 2 months ago. I am not aware of anything usual yet.
On a side note, the paint on the spoiler is really thin. I didn't bother to wax the spoiler after I put it on. I was washing the car over the weekened and noticed that the paint at the front tip of the upper spoiler is wearing off. What the...
#3
the lower wing should be flush against the trunk at all points. There is no adhesive to fix the lower wing down along the front edge of it.
On mine, to the front of the right lower wing is slightly raised. Since I had mine installed at a dealership, I went back and asked them to fix it. 2 hours later, they come back saying there is no way to fix it, the lower wing isn't straight and there is nothing they can do besides order another one.
So long story short, I'm waiting for a new lower wing to be installed.
I figure, over a grand installed, it better look it.
On mine, to the front of the right lower wing is slightly raised. Since I had mine installed at a dealership, I went back and asked them to fix it. 2 hours later, they come back saying there is no way to fix it, the lower wing isn't straight and there is nothing they can do besides order another one.
So long story short, I'm waiting for a new lower wing to be installed.
I figure, over a grand installed, it better look it.
#4
I also noticed a slight gap. And also one of the corners looked like the paint was wearing off, I figured it was possible a kicked up rock hit it or something. Its very small though I might just use touch-up paint.
#10
I bought mine thru the dealer, it was MSRP $1040, plus another hundred or so for install. It was the only dealer installed option that I paid for. I didn't want to drill holes myself, and wanted the wing as part of the financing.
#11
Boost needed
Thread Starter
Join Date: Dec 2003
Location: San Jose, CA
Posts: 2,557
Likes: 0
Received 0 Likes
on
0 Posts
thnx for the replies i actually installed it myself the spoiler is around 830 dollars at rosenthal... very fast shippin and its free! looks nice besides that small lil gap but f* it thats what i get for tryin to save money... hehe
#13
I had trouble with my wing as well. It started with lifting in the courner as indicated in the pic above and then actually cracked on the bolt on the opposite side. All fixed now $500 later. the trouble was an improper installation to begin with. We're taking brakets being off by millimeters. I took the wing to a body shop they fixed the crack - looks as good as new, actually better because the wing is now colour matched to the car and it stuck on like glue. It barely moves at high speed, where as before the repair it was shaking a lot just driving 120. Likely the cause of the crack. We had thought it was casused by air getting up under one of the lifted areas.
#14
100% Italian
Join Date: Jul 2003
Location: orange,ca
Posts: 9,422
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by bureau13
They shipped the spoiler for free? Seriously? I didn't know that, that's a pretty large item for free shipping.
jds
They shipped the spoiler for free? Seriously? I didn't know that, that's a pretty large item for free shipping.
jds
#15
The only thing I dislike about the MS wing is the upper wing shakes on big bumps, and shakes when you shut the trunk, even if you don't slam it. So I end up shutting the trunk while holding the wing.
#16
Boost needed
Thread Starter
Join Date: Dec 2003
Location: San Jose, CA
Posts: 2,557
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by JasonHamilton
The only thing I dislike about the MS wing is the upper wing shakes on big bumps, and shakes when you shut the trunk, even if you don't slam it. So I end up shutting the trunk while holding the wing.
The only thing I dislike about the MS wing is the upper wing shakes on big bumps, and shakes when you shut the trunk, even if you don't slam it. So I end up shutting the trunk while holding the wing.
#17
I've only taken the car to 100. The area I'm in has a lot of cops on the roads, so I've not had any chance to go faster, and I am no longer with a death wish, so I try to be careful
#18
Has anyone replaced a stock spoiler with the MS? I'm wondering if they use the same holes. The pics make it look like the old holes would be covered anyway, but no new holes would be ideal.
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM