slllygrl10

I want to replace the stock hood stand to hydraulic stand/stock trunk stand. I saw someone here with it but dont remember who. Pics/info would be great. Thanks.

army_rx8

you can get a hydraulic hood mounts (two of them)...so you don't need the part that keeps it from falling when you open it anymore (is that what you were asking)...i saw it on Japanparts.com but it isn't cheap...but that's the autoexe one...i think someone on here got some that mounted right up from like sutozone or something like that...but i forgot who and i forgot where they got them

sorry

slllygrl10

yeah thats the one but was wondering if I can get the trunk stand instead on our 8's maybe it will work.

army_rx8

i don' tthink the trunk ones will fit on the front..i wanna sy the ones he used were for a mustage or something domestic.

slllygrl10

http://www.japanparts.com/Pic/pic146/143damper.JPG is this the one ur talking about?

Outlaws eXtreme

The Autoexe ones are expensive. Use the search and find the post where someone used some Autozone parts to modify the hood mechanism.. it was cheaper (About 30 bucks at most) and easier than expected to install.

army_rx8

yea those are the ones...i wouldn't pay that price though....vividracing has then too..and they are a rip off. they are more than a RB sway bar adn end links. LOL

slllygrl10

ok thanks

jaehyun127

keep us updates prrtygrl!! i'm interested too.

Kel Rx8

custom is the way to go,everyone is expensive
if i was turbo this would be my first step
but Im stock under there so I left it alone

Razz1

Don't attempt the trunk shock. Look at the weight of the front hood and the length.

The ones in the rear will not work for the hood.

devoid

I know I'm one of the peeps!

Here's a link to my site for lots of pics...I've also attached a few key pics:
http://devoid.mine.nu/CarAlbum.asp?AID=208&CT=RX

Also, they are from AutoExe...

moRotorMotor

I'm not sure if you saw this one yet. It's in the DIY section found here.

shawrf1

AutoExe:

StealthTL

iTrader: (1)

Here is a DIY on hood struts -

DIY

S

zoom44

i think hood struts are still available from Mazda in the UK you should check with the UK guys or see if Tommy from Rosenthal can get you a price on them.

Tamas

iTrader: (1)

For the DIY hood struts, JC Whitney stocks the Strong Arm struts StealthTL mentioned in his thread. I got them and currently am working on the upper brackets.
You need four 6 mm threaded ball joints for these struts that are available at a local parts store (I got mine at Napa), but JC whitney might have these too, I didn't check.
These struts are verified to have the appropriate push, so they won't cause damage to the aluminum hood (at least not until they start to stick :D)

LiL BenNy

the DIY does it require drilling?

Tamas

iTrader: (1)

No. At least not into your car.
However, since you have to fabricate the upper mounting brackets, you will have to drill holes into the custom bracket

orbist

They are a stock accessory in the UK, about 100UKP, I got them as a replacement for the illuminated gearstick when I got fed up with them failing (had 8!)

Surprised they aren't available in the US from Mazda.

LiL BenNy

whats that in USD? should get some and ship us some!