HID VVME 3K H11's installed *Pics and Vid*
#1
UPDATED WITH PIAA PLASMA IONS HID VVME 3K H11's installed *Pics and Vid*
So basically I finally got these installed and I like them.. more in the description of the video.. these are couple with 6K LED 194's which will soon (Thursday) be PIAA Plasma's IONS. I also ordered Optilux H9 Hi-Beams in Yellow maybe 2500K.. I need to check again but either way I ll post those when they come in. Try to watch this video in HD if you can to improve the quality.. I shot with a iPhone 4S
O Yeah Stock Headlights and the Foglight Re-wiring done, I did a video since I had a hard time find out how these looked besides perusing through pics
The PIAA's will be coming out, I do not light.. almost stockish looking and I can't even tell if they are on or not like I could with the LED's
O Yeah Stock Headlights and the Foglight Re-wiring done, I did a video since I had a hard time find out how these looked besides perusing through pics
The PIAA's will be coming out, I do not light.. almost stockish looking and I can't even tell if they are on or not like I could with the LED's
Last edited by Globetrahter; 01-25-2012 at 02:30 PM. Reason: Embed
#3
The output with the light is pretty bright, if for whatever reason your headlights went out then you would be able to navigate with these but totally not for the long haul. Of course I can see a couple of more things on the side of the right now in the dark. So I guess it does improve spread alittle. I do probably need to adjust them because when I have them on I see them coming through the bottom of my headlight but overall I'm happy
#4
Registered
iTrader: (6)
Join Date: Jun 2007
Location: Pleasanton, CA
Posts: 1,781
Likes: 0
Received 0 Likes
on
0 Posts
Can you test them out on a pitch black road and let me know the difference between just the projector HID's from the headlight, then how the output changes when you have both of them on? I'm looking for a solution for me when I drive canyon roads at night because I feel I can't see as far as I'd like to. I'm debating either HID's in the fog lights since it's cheap, otherwise I'm probably going to be looking into swapping the fogs for actual driving lights. LMK. Thanks.
#6
Can you test them out on a pitch black road and let me know the difference between just the projector HID's from the headlight, then how the output changes when you have both of them on? I'm looking for a solution for me when I drive canyon roads at night because I feel I can't see as far as I'd like to. I'm debating either HID's in the fog lights since it's cheap, otherwise I'm probably going to be looking into swapping the fogs for actual driving lights. LMK. Thanks.
#8
#10
Registered
#12
Actually I did not have to use Pliers or anything, or break any reflectors. Its Plug n Play. The only thing I had to do was tie down the HID modules and then I took out the old non HID Bulbs and Put the HID ones in.
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
reverse01134
RX-8's For Sale/Wanted
0
07-16-2015 10:27 PM
eugenewang55
Series I Exterior Appearance and Body Kits
21
03-18-2007 09:40 PM
fog, fogs, h11, hid, install, installation, installing, make, mazdaspeed, piaa, plasma, rx8, rx8club, upgrading, vvme