Clear Corners
#1
1st time rotorhead
Thread Starter
Join Date: May 2005
Location: Closter, NJ
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Clear Corners
I went to an RX8 meet yesterday and almost everyone had clear corners. They all had the same kind though, and i didnt really like it. The ones they had bulge out to the sides. Are there clear corners EXACTLY like the stock yellow ones, and not ones that are sized differently? If so, where can i get the and how much.
#2
Registered User
Join Date: Mar 2004
Location: Phoenix, AZ
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Those are the exact clears that come on the 8, stock , in other countries. Flat ones that mirror our orange ones would have to be something from an aftermarket vendor. Personally I view our orange ones as aftermarket, compared to the OEM clears where our cars were built (Japan)
Last edited by poolsidenaz; 09-25-2005 at 11:23 AM.
#6
May Cause Anal Leakage
Join Date: Oct 2004
Location: Orlando & Chicago
Posts: 3,191
Likes: 0
Received 0 Likes
on
0 Posts
Just a guess, but It could be that both the orange and the clears are trademarked by their respective manufacturer. That's why they differ in design slightly, as not to infringe on each others trademark or copywrited design.
#8
1st time rotorhead
Thread Starter
Join Date: May 2005
Location: Closter, NJ
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Well, seeing as i dont like the orange stock corners that come with the car, and i probably dislike the JDM clearcorners even more, i wanted to get the same exact shaped corners in clear as the stock ones. It turns out i cant find them anywhere. I think im going to have to custom fab these myself. If anyone knows where i can get corners that sit flush with the fenders, please tell me, otherwise im going to make my own (ill probably do that anyway). Well, when im done ill try to post pics.
#9
beyond the ultraworld
Join Date: Oct 2003
Location: Southampton, UK
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
If you check the front wing, the buldge actually flows into what I thought was a dent in my wing. There is a slight crease just above the clear corner. Only spotted it when fitting my INGs bumper and had never noticed the clear corners had a buldge until I took them off.
Something I've always wondered, in the US do the 'clear corner' lights come on when you put the side lights on (i.e. first position before xenons come on) Also do they act like in UK when you indicate they come on?
Something I've always wondered, in the US do the 'clear corner' lights come on when you put the side lights on (i.e. first position before xenons come on) Also do they act like in UK when you indicate they come on?
#10
Registered User
Join Date: Mar 2004
Location: Phoenix, AZ
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by orbist
...Something I've always wondered, in the US do the 'clear corner' lights come on when you put the side lights on (i.e. first position before xenons come on)
Also do they act like in UK when you indicate they come on?
#11
beyond the ultraworld
Join Date: Oct 2003
Location: Southampton, UK
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the answers.
Yes my second question was about blinking when turn signal on. Think its a UK requirement to have 'side repeaters' as they are called.
Yes my second question was about blinking when turn signal on. Think its a UK requirement to have 'side repeaters' as they are called.
#12
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
I love the OEM japanese clear corners....that was the first real mod I did to the car...to me there really isnt that much difference in the look....I really wanted to get rid of the amber so the clear was a great improvement...even if they are shaped a little different...
Shinks :D
Shinks :D
#21
Shock and Awe
Originally Posted by RotaryManiac
Its about an inch out. thats not just a bulge for me.
I've never seen anyone's corners stick out an inch... have a picture?
#22
1st time rotorhead
Thread Starter
Join Date: May 2005
Location: Closter, NJ
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
LOL, in both of these pictures above you cant really see how and where they bulge out. Can on of you 2 post a head on pic from the front end of the car, but pretty much only show the bulge? Anyway, it seems you guys have different clear corners than i have seen before. There are many pics on the forum with people that have the ones that stick out a LOT. I was at a NORTHEASTERN club meet, and we took pics. Check that part of the site for pics on the clear corners.
#23
1st time rotorhead
Thread Starter
Join Date: May 2005
Location: Closter, NJ
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx8club.com/attachment.p...chmentid=59717
Check the clear corners on the black 8 to the right. THe pic isnt very good, but you can see it sticks out quite a bit.
Check the clear corners on the black 8 to the right. THe pic isnt very good, but you can see it sticks out quite a bit.