looking to mount and install my emanage ultimate i want to run the ultimate in the glove box, my question is does anyone have a picture i can use as a reference where to place the harness through the firewall? looks like the heater box is behind the glove box...pictures would help alot

thanks

greg

 

hahahah I'm in that same boat with you

don't where to mount it

 

If you remove the washer fluid tank and pull back the insulation on the firewall you will see where the steering would have came through on a right hand drive car. This works perfect for making a hole to pass through there, there is enough space on the inside of the firewall where you will not drill into anything and it will pass out right behind the glove box. when feeding the wires from the engine to the interior you will need to direct the wires slightly downward and you will see them emerge into your floorboard. There is a pic somewhere on the boards. I think it was in a thread for routing the power wire for an amp.

 

thanks alot for the help!

 

so i still have to drill it ??
I thought that there was gonna be a hole already made.

am i wrong ?

 

yup, you have to drill it.

 

I took a picture for you but forgot to upload it last night. It shows where to drill/cut the hole in the firewall. I will upload it tonight.

 

As promised. Pics of where I cut the hole for my EMU harness.

 

makes alot more sense thanks tdiddy