Thanks for the update - I'll keep working it; for now I have no real complaints except for scaling the MAF - which I can do without volts BUT... the right way is to use volts since that is how the table is configured.
|
I have a 5MT (4port) EUDM RX8 and I was wondering if by using the Pro Tuner I could do a couple of things to my RX8 (since the product page is not very informative):
a) Alter the redline limit (increase it probably) b) Smooth out my rich AFRs (low 11s, trying to increase mileage and HP output) c) Alter the kick-in/shutdown temps of the fans d) Increase the idle e) Toy with IAT (although I really don't want to do anything serious with this) I understand from these posts that (b), (c) and (d) are OK, but what about the others ? I have also sent an email to Hymee about getting the Tuner and I am waiting for the good news....:p: |
You can do them all.
|
Pro tuner work with 09's?
|
Originally Posted by Symbioticgenius
(Post 2998166)
Pro tuner work with 09's?
Cheers, Hymee. |
Originally Posted by Hymee
(Post 2999979)
I need a CAL-ID out of one of them so I can have a look.
Cheers, Hymee. |
Originally Posted by Chibana
(Post 3000709)
I'll play the dummy. What's a CAL-ID? I'm interested in this for my 09, so I would gladly lend a hand.
You can read it with a scan tool, just like you can read the cars VIN number electronically. Also, if you remove the cover from the PCM, there will be a label on it with a number like N3J6 or something like that. Take a pic of it and send it to me if you want. Cheers, Hymee. |
What is the all motor HP gain over stock with the Hymee?
I got 14 WHP last night. |
Originally Posted by Kane
(Post 3001320)
What is the all motor HP gain over stock with the Hymee?
I got 14 WHP last night. |
Yeah but most of our discussions are based on FI; I just didn't know if anyone was messing with the Hymee in NA mode. And if so what areas they noticed were jacked?
|
Hymee pro tuner on N/A
Originally Posted by Kane
(Post 3001511)
Yeah but most of our discussions are based on FI; I just didn't know if anyone was messing with the Hymee in NA mode. And if so what areas they noticed were jacked?
|
Of course any gains to be had are the bragging rights of the tuner, not the software! I'm just providing a tool, you guys are the smart ones :)
Cheers, Hymee. |
I wish we could figure out how to block those damn cels ...... !
|
Originally Posted by Brettus
(Post 3011183)
I wish we could figure out how to block those damn cels ...... !
|
/\ easy for you to say
|
Originally Posted by Brettus
(Post 3011266)
/\ easy for you to say
|
I'm sure it does - if you know what you are doing ....
|
Originally Posted by Brettus
(Post 3011306)
I'm sure it does - if you know what you are doing ....
Aren't you tuning your car with this thing? |
sure - just don't know how to turn off the Cels
|
Originally Posted by MazdaManiac
(Post 3011324)
Aren't you tuning your car with this thing?
Ignoring potential important warnings = NO! It has not been a requirement of mine to do this. I don't need to mask any CELS with the blower. When I get time and enough need to mask the CEL's I'll add that bit in. It hasn't been a concern for anyone so far. Cheers, Hymee. |
Originally Posted by Hymee
(Post 3013032)
Tuning = YES.
Ignoring potential important warnings = NO! It has not been a requirement of mine to do this. I don't need to mask any CELS with the blower. When I get time and enough need to mask the CEL's I'll add that bit in. It hasn't been a concern for anyone so far. Cheers, Hymee. How about the completely superfluous P0300/301/302? Or the P225x for those without an airpump? Or the P2401-07 for the Pettit owners? |
Originally Posted by Hymee
(Post 3013032)
It hasn't been a concern for anyone so far.
. |
Any updates on this software? Just purchased a used pettit sc system and thinking of going with the pro tuner as my choice of engine management.
Hymee, have you had any pettit sc customers? Has the CEL masking feature been added? Will have a midpipe. Do any base maps come with the pro tuner? Would like to experiment a littler NA before I start experiment with boost. I know you have some base maps for you sc, do you think they will work with the pettit sc? Thanks |
Originally Posted by Macius8
(Post 3062639)
Any updates on this software? Just purchased a used pettit sc system and thinking of going with the pro tuner as my choice of engine management.
Hymee, have you had any pettit sc customers? Has the CEL masking feature been added? Will have a midpipe. Do any base maps come with the pro tuner? Would like to experiment a littler NA before I start experiment with boost. I know you have some base maps for you sc, do you think they will work with the pettit sc? Thanks The Cel blocking thing has not been addressed as yet - hopefully he will get onto it . |
Great. Another question. I'm a total newb when it comes to tuning. May know how a few things work but never tuned anything in my life. How's the difficulty of learning all the basics, adjusting you own maps, etc. Have any of you started on the pro tuner? Anyone I can constantly bug for help when it comes to the pro tuner? LOL
|
All times are GMT -5. The time now is 06:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands