Notices
Series I Engine Tuning Forum EMS (Flash Tuning, Interceptor, Piggy Back, Stand Alone)

Feedback on Can's ECU Stage 1

Old Dec 14, 2003 | 12:15 PM
  #1  
Marcus Desaul's Avatar
Thread Starter
Registered User
 
Joined: Nov 2003
Posts: 22
Likes: 0
Feedback on Can's ECU Stage 1

From what I've been able to read,....which has been nearly everythying on this Stage 1 unit, I don't believe I've heard anyone give any feedback on the Stage 1. From what I've been able to gather, he was beginning to ship late last month.

What I'd like to do here is to start a thread where people, once they have been shipped and have installed their Stage 1 in the 8, can return some feedback comments regarding the product.

#1.) How easy or hard was it to install based on the instructions provided. How long did it take you to install?
#2.) On a scale from 1-10, 1 being a complete novice and 10 being a certified Mechanic, where does the installation land?
#3.) Where you able to notice the increase in HP while riding? I believe this is the Butt Dyno everyone refers to. We know where the improvements are intended to be. Does the unit give the desired HP in the desired range
#4.) Have you put it on a dyno?
#5.) Your overall satisfaction with the product.

I will never be a Stage 2 man because the only mods I'm real interested in are aesthetic/body. But Based on all I've read regarding Can's Stage 1, I am seriously considering the extra HP just for the fun of it.

Marcus.
Reply
Old Dec 14, 2003 | 01:25 PM
  #2  
Jag's Avatar
Jag
Institution Escapee
 
Joined: Oct 2003
Posts: 150
Likes: 1
From: Alberta, Canada
A couple of guys have experienced the Stage1 upgrade other than Canzoomer, there's a post on it in the Mazdaspeed/Aftermarket Performance forum.

here's the link to it :

Zoomer's Mod Tested
Reply
Old Dec 14, 2003 | 03:08 PM
  #3  
RXhusker's Avatar
Int-X 293WHP 242TQ :)
 
Joined: Oct 2002
Posts: 1,022
Likes: 0
From: Omaha, NE
If you had read everything you would know that the unit has not shipped yet. There have been a few reviews from some of the testers but nobody actually has the mod yet. We all hoping that CanZoomer comes through with a Christmas delivery.
Reply
Old Dec 14, 2003 | 10:51 PM
  #4  
Marcus Desaul's Avatar
Thread Starter
Registered User
 
Joined: Nov 2003
Posts: 22
Likes: 0
Thanks RXHusker and Jag. I hadn't read it "all" and so I appreciate the heads up. I should suspect that when people start to receive them, I'm sure they'll voice their thoughts without prompting from me.

On a side note RXHusker, I just moved from Omaha to Fort Worth and bought my 8 down here. Been driving your 8 in that snow Omaha got about a week ago?
Reply
Old Dec 15, 2003 | 09:02 AM
  #5  
RXhusker's Avatar
Int-X 293WHP 242TQ :)
 
Joined: Oct 2002
Posts: 1,022
Likes: 0
From: Omaha, NE
I have been out driving in the snow! With my snow tires and rims on the car handles fantastically. The DSC, low torque, 50/50 weight dist, and good snow tires make for a very capable winter driver. Turning off the DSC turns it into a very very fun spinning top.

Originally posted by Marcus Desaul
Thanks RXHusker and Jag. I hadn't read it "all" and so I appreciate the heads up. I should suspect that when people start to receive them, I'm sure they'll voice their thoughts without prompting from me.

On a side note RXHusker, I just moved from Omaha to Fort Worth and bought my 8 down here. Been driving your 8 in that snow Omaha got about a week ago?
Reply
Old Dec 15, 2003 | 08:36 PM
  #6  
canzoomer's Avatar
Forum Vendor
 
Joined: Jul 2003
Posts: 1,223
Likes: 1
From: Edmonton, Alberta
Originally posted by RXhusker
If you had read everything you would know that the unit has not shipped yet. There have been a few reviews from some of the testers but nobody actually has the mod yet. We all hoping that CanZoomer comes through with a Christmas delivery.
Good news:
See the announcement in the Canzoomer Forum on release.

https://www.rx8club.com/showthread.p...threadid=16692
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
galognu
Rotary Swaps
138
Nov 16, 2020 05:20 AM
RX8mzda
New Member Forum
1
Oct 14, 2015 05:12 PM
stickmantijuana
Rotary Swaps
11
Sep 24, 2015 12:47 AM
Draken
RX-8 Discussion
4
Sep 21, 2015 06:14 PM
stickmantijuana
Non-Rotary Swaps
2
Sep 19, 2015 03:15 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 08:34 PM.