RonniEdwards

iTrader: (1)

So i have a Cobb AP and my RoXy has been tuned by BHR. Whose map wasn't locked. So i went into edit the fan temp cut on times and I have an issue. I adjusted the rev limit to around 8300 and the fans to come on at 187 degrees F. Then I flashed the map to the car and it says successful. Well my problem is my fans decide they don't really wanna do their job and just stay on low constantly, no matter the temp....any ideas whats goin on?

04
MT
100k

wcs

iTrader: (2)

Why don't you just ask Ray to do this for you then you know it's done right?

tigersilhouette

Check to make sure access tuner is in the correct unit (ie F not C). Also, there are three settings you need to change, Fan1 low Fan1 High and Fan2 High. Did you change all the settings to appropriate values? Also check the hysteresis, which is how much the temp has to drop before the fan turns off. That should less than 10 degrees F.