AccessTUNER Race for RX8 Released!!!
10-01-2008, 12:00 AM
#102
The data logging worked great, EXCEPT that it doesnt' have some crucial variables?!?! In the "options", it has accelerator position, collant temp, ignition advance, intake temp, and a dozen other things. BUT IT DOESNT HAVE AFR / equivalence ratio! That, nor speed. I'm trying to get a data log to send to MM so my tune can be updated (the AP itself says i'm running in the low 11's, N/A), but I know without a graph of AFR that's nearly impossible.
Did anyone else notice this?? Am I missing this option or something somewhere?? "MAF (g/s)" and "MAF voltage" are there, and a few other useful ones, but no "equivalence ratio".
Aside from that issue, after downloading the "dongle" driver and making sure the ap manager software was installed, the tuner race software ran perfectly. Some slight display glitches (on Vista) but aside from that, a very nice program. Except the lack of AFR logging!!
Ideas??
Did anyone else notice this?? Am I missing this option or something somewhere?? "MAF (g/s)" and "MAF voltage" are there, and a few other useful ones, but no "equivalence ratio".
Aside from that issue, after downloading the "dongle" driver and making sure the ap manager software was installed, the tuner race software ran perfectly. Some slight display glitches (on Vista) but aside from that, a very nice program. Except the lack of AFR logging!!
Ideas??
10-01-2008, 12:07 AM
#103
One more thing - if you go to the "options" while in "live tuning" mode, the options tabs change! if connected while "live" there are a number of checkboxes of which data to log, but AFR is not one of them. If it is NOT in live mode, there appears to be a number of tabs allowing you to connect with different external O2 sensors. Does this imply that logging of the equivalence ratio (usually just displayed by the AP "live data" screen) is not available to be logged through this software?
That's all I can tell....could anyone clarify this? Thanks....
That's all I can tell....could anyone clarify this? Thanks....
Last edited by elysium19; 10-01-2008 at 12:12 AM.
10-01-2008, 12:12 AM
#104
Registered
iTrader: (1)
Join Date: Apr 2004
Location: Marietta, Georgia
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
AFR is called Lambda in the options. Vehicle speed is called VSS I believe.
The data logging worked great, EXCEPT that it doesnt' have some crucial variables?!?! In the "options", it has accelerator position, collant temp, ignition advance, intake temp, and a dozen other things. BUT IT DOESNT HAVE AFR / equivalence ratio! That, nor speed. I'm trying to get a data log to send to MM so my tune can be updated (the AP itself says i'm running in the low 11's, N/A), but I know without a graph of AFR that's nearly impossible.
Did anyone else notice this?? Am I missing this option or something somewhere?? "MAF (g/s)" and "MAF voltage" are there, and a few other useful ones, but no "equivalence ratio".
Aside from that issue, after downloading the "dongle" driver and making sure the ap manager software was installed, the tuner race software ran perfectly. Some slight display glitches (on Vista) but aside from that, a very nice program. Except the lack of AFR logging!!
Ideas??
Did anyone else notice this?? Am I missing this option or something somewhere?? "MAF (g/s)" and "MAF voltage" are there, and a few other useful ones, but no "equivalence ratio".
Aside from that issue, after downloading the "dongle" driver and making sure the ap manager software was installed, the tuner race software ran perfectly. Some slight display glitches (on Vista) but aside from that, a very nice program. Except the lack of AFR logging!!
Ideas??
10-01-2008, 07:12 AM
#106
Registered
iTrader: (1)
Join Date: May 2003
Location: PA
Posts: 3,754
Likes: 0
Received 0 Likes
on
0 Posts
the units will change depending on what you have selected int he options menu... there is standard and something else, toggle that guy to whatever you dont have selected right now
10-03-2008, 07:13 PM
#109
Registered
iTrader: (1)
Join Date: May 2003
Location: PA
Posts: 3,754
Likes: 0
Received 0 Likes
on
0 Posts
can someone post up a csv file from the ATR software that includes maf, load, speed,afr, and rpms?
I'm working on an auto importing and graphing excel spreadsheet and need a csv to work with. My own don't have the speed on and I can't make one quickly since my AP is not installed do to some dealer maintenance...
I'm working on an auto importing and graphing excel spreadsheet and need a csv to work with. My own don't have the speed on and I can't make one quickly since my AP is not installed do to some dealer maintenance...
11-29-2008, 11:07 PM
#110
Dongbag extrordinare
Join Date: Nov 2004
Location: Away from the fruits of my labor
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
The MAF scaling is not working in live tuning mode. It goes all the way to the max flow/voltage box and stays there? Has COBB come out with a fix for this??
02-05-2009, 01:07 AM
#113
Registered
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Is this version of the software going to work with a european accessport and a EuroDM 2006 RX8?
I just downloaded it but I don't have my accessport at work to try it out...
I just downloaded it but I don't have my accessport at work to try it out...
02-05-2009, 11:03 AM
#116
http://www.accessecu.com/support/acc...e_RX8M_06C.exe
I really wish they would just make a way for the AP to do some logging
and
I really wish they would just make a way for the AP to do some logging
and
IF IT IS, I suggest non California to get this one instead:
http://www.accessecu.com/support/acc...ce_RX8M_06.exe
02-06-2009, 12:05 AM
#117
Registered
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately this version is not working with the EuroDm Accessport version,as I expected...
Can you please give me a link to download the european version of the accesstuner race software?
Can you please give me a link to download the european version of the accesstuner race software?
Last edited by KostasNK; 02-06-2009 at 12:47 AM. Reason: Spelling Mistake!
03-10-2010, 07:54 PM
#122
Last edited by MazdaManiac; 03-10-2010 at 08:26 PM.