Rotary Extreme Cat-back Exhaust Info
#51
By my eyeball, those mufflers are hanging significantly lower than other designs. I was wondering if you've considered modifying (flattening) the bottom corners of those cans to help take the inevitable scrapes - particularly for those coilover folks who plan on dropping their ride.
Eagerly awaiting your follow-on info.
Eagerly awaiting your follow-on info.
#52
Registered User
Join Date: May 2003
Location: Bayarea, CA
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
It won't scrape because the lowest point of the muffler is very close to the rear axles. It's purposedly designed like that so you can see the mufflers. It's lower than the lowest point of the suspenion arm by about 1".
Chuck Huang
http://www.rotaryextreme.com
Chuck Huang
http://www.rotaryextreme.com
Originally posted by HIX8
By my eyeball, those mufflers are hanging significantly lower than other designs. I was wondering if you've considered modifying (flattening) the bottom corners of those cans to help take the inevitable scrapes - particularly for those coilover folks who plan on dropping their ride.
Eagerly awaiting your follow-on info.
By my eyeball, those mufflers are hanging significantly lower than other designs. I was wondering if you've considered modifying (flattening) the bottom corners of those cans to help take the inevitable scrapes - particularly for those coilover folks who plan on dropping their ride.
Eagerly awaiting your follow-on info.
#53
That's good to hear. Looks excellent so far.
If you have a good pic of the car sitting on the ground, I'd like to get an idea of what it looks like for the street (even with your tail skirt mod).
If you have a good pic of the car sitting on the ground, I'd like to get an idea of what it looks like for the street (even with your tail skirt mod).
#54
4AT poor mileage king
Join Date: Jan 2004
Location: now... 818 area code
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Rotary Extreme
It won't scrape because the lowest point of the muffler is very close to the rear axles. It's purposedly designed like that so you can see the mufflers. It's lower than the lowest point of the suspenion arm by about 1".
Chuck Huang
http://www.rotaryextreme.com
It won't scrape because the lowest point of the muffler is very close to the rear axles. It's purposedly designed like that so you can see the mufflers. It's lower than the lowest point of the suspenion arm by about 1".
Chuck Huang
http://www.rotaryextreme.com
I do like the design - nice work.
BTW, any update on release, cost, etc.?
#55
Registered User
Join Date: May 2003
Location: Bayarea, CA
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Here is another photo of the exhaust.
You are not going to scrape it unless you lower the car more than 3"
The release date should be between mid-Feb. to end of Feb. We are waiting for the exhaust to come from Japan. Cost on the exhaust is $600.
Thank you.
Chuck Huang
http://www.rotaryextreme.com
You are not going to scrape it unless you lower the car more than 3"
The release date should be between mid-Feb. to end of Feb. We are waiting for the exhaust to come from Japan. Cost on the exhaust is $600.
Thank you.
Chuck Huang
http://www.rotaryextreme.com
Thread
Thread Starter
Forum
Replies
Last Post
Modified Dave
Canada For Sale/Wanted
4
03-05-2016 04:36 PM
Kanthinar
New Member Forum
15
12-21-2015 01:24 PM