Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

RACING BEAT PCM FLASH for the '05 models is OUT

Old Nov 21, 2006 | 08:58 PM
  #76  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,140
I was only kidding, extrapolated flywheel ratings are a wild-@ssed swag at best
Reply
Old Nov 21, 2006 | 11:23 PM
  #77  
Astral's Avatar
Purveyor of fine bass
 
Joined: Aug 2003
Posts: 1,618
Likes: 2
From: Worcester, MA
Originally Posted by TeamRX8
unfortunately stainless steel and it's fabrication costs more than some programming time and a few electrons
plus it sounds so damn good. when 'vette owners tell you how nice the exhaust note is, you know it's good
Reply
Old Nov 26, 2006 | 11:42 PM
  #78  
SoloMazda8's Avatar
Leisy
 
Joined: Jun 2005
Posts: 166
Likes: 0
From: Louisville, Ky
So how will you know that RB did flash your PCM? Will you feel a difference?
Reply
Old Nov 27, 2006 | 12:09 AM
  #79  
shaunv74's Avatar
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
I'd suggest you use a SCANalyzer or a Gtech to take a baseline reading before you send in your PCM and then take another reading or Gtech pull to see what the difference is after.
Reply
Old Nov 27, 2006 | 04:50 AM
  #80  
BoosTED's Avatar
Registered
iTrader: (2)
 
Joined: Dec 2004
Posts: 2,896
Likes: 2
From: Minneapolis, MN
Originally Posted by SoloMazda8
So how will you know that RB did flash your PCM? Will you feel a difference?
You will feel the difference and notice how smooth it is throughout the RPMs.
Reply
Old Nov 27, 2006 | 10:08 AM
  #81  
Landon's Avatar
Blonde Bastard
 
Joined: Jul 2006
Posts: 733
Likes: 1
From: Ellicott City, Maryland
Ok guys here comes the "noob" question of sorts....

In my 05 I found out the hard way that if the ECU looses power either by disconnecting the battery or battery diying the car will not start. According to mazda the security on the keys or something is lost when that happens as a security measure or something. I want to get this flash but if I cant start my car after getting the ECU back what good is it? Anyone with an 05 (with the flipout key) or later familiar with this? How do I get around this or get my keys reprogrammed without having mazda roadside assistance tow my car to the dealer to have them "fix" this issue?
Reply
Old Nov 27, 2006 | 11:07 AM
  #82  
Astral's Avatar
Purveyor of fine bass
 
Joined: Aug 2003
Posts: 1,618
Likes: 2
From: Worcester, MA
Landon, that's strange, I've disconnected my battery many a times (e.g. car audio install) and the car starts back up just fine. I have an '05 with a flipout key. Sounds like your original problem was something else.
Reply
Old Nov 27, 2006 | 11:20 AM
  #83  
Landon's Avatar
Blonde Bastard
 
Joined: Jul 2006
Posts: 733
Likes: 1
From: Ellicott City, Maryland
Originally Posted by Astral
Landon, that's strange, I've disconnected my battery many a times (e.g. car audio install) and the car starts back up just fine. I have an '05 with a flipout key. Sounds like your original problem was something else.
Only thing I did before was the CAI install where it says disconnect the battery for safety reasons...

hmmmm... Your dealer never told you to never let the battery go dead or something otherwise you would have this issue? Then again my dealer is russel mazda which doesnt have the highest ratings in the way of customer service...
Reply
Old Nov 27, 2006 | 03:47 PM
  #84  
Astral's Avatar
Purveyor of fine bass
 
Joined: Aug 2003
Posts: 1,618
Likes: 2
From: Worcester, MA
Originally Posted by Landon
Only thing I did before was the CAI install where it says disconnect the battery for safety reasons...

hmmmm... Your dealer never told you to never let the battery go dead or something otherwise you would have this issue? Then again my dealer is russel mazda which doesnt have the highest ratings in the way of customer service...
Nope, the dealer never told me that. I've disconnected the battery many times. The only thing is that after you reconnect it, you have to follow the manual's procedure for resetting power steering by turning the wheel all the way to the left and then all the way to the right. Then restart the car and the DSC light will go away.
Reply
Old Nov 27, 2006 | 08:58 PM
  #85  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,140
Originally Posted by Landon
Ok guys here comes the "noob" question of sorts....

In my 05 I found out the hard way that if the ECU looses power either by disconnecting the battery or battery diying the car will not start. According to mazda the security on the keys or something is lost when that happens as a security measure or something. I want to get this flash but if I cant start my car after getting the ECU back what good is it? Anyone with an 05 (with the flipout key) or later familiar with this? How do I get around this or get my keys reprogrammed without having mazda roadside assistance tow my car to the dealer to have them "fix" this issue?

LIES!!!!!

I have an '05 that I completely disconnect the battery for weeks on end, never had an issue
Reply
Old Nov 27, 2006 | 09:13 PM
  #86  
Nopstnz's Avatar
Registered
 
Joined: Oct 2005
Posts: 939
Likes: 28
From: Port Royal, SC
Me neither. Do it all the time w/ no problems
Reply
Old Nov 28, 2006 | 03:07 AM
  #87  
LiL BenNy's Avatar
Bubblicious? DEF.
 
Joined: Mar 2004
Posts: 4,062
Likes: 0
so what exactly do they do to make the car run smoother? my car is running like ****... im really looking for it to run how it use to like 2-3 flashes ago... i use to get 17.5 mpg conistantly driving it fairly hard.. now if i baby it i get maybe 16 and if i drive it semi hard 15mpg... but the biggest problem is it hesitates going up to 3500rpm then all of a sudden like jolts for 500rpm then dies back down and slowly goes up.... would this flash help? any comments from the 04 owners with this?
Reply
Old Nov 28, 2006 | 10:23 AM
  #88  
Astral's Avatar
Purveyor of fine bass
 
Joined: Aug 2003
Posts: 1,618
Likes: 2
From: Worcester, MA
I have no first-hand experience, I doubt that the flash will 'cure' any problems like that. You're best off seeing the dealer about the problems you're having.
Reply
Old Nov 28, 2006 | 10:32 AM
  #89  
Landon's Avatar
Blonde Bastard
 
Joined: Jul 2006
Posts: 733
Likes: 1
From: Ellicott City, Maryland
Originally Posted by Astral
I have no first-hand experience, I doubt that the flash will 'cure' any problems like that. You're best off seeing the dealer about the problems you're having.
Yeah I think I will just have rosenthal mazda check it out for me since I have them do all of the work on it now since my dealer aparently just dont know anything of whats going on with the car. Its kinda depressing but oh well... Once Rosenthal checks it out I think I will go ahead and send the ECU off for that RB Flash
Reply
Old Nov 28, 2006 | 12:23 PM
  #90  
shaunv74's Avatar
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
Originally Posted by LiL BenNy
so what exactly do they do to make the car run smoother? my car is running like ****... im really looking for it to run how it use to like 2-3 flashes ago... i use to get 17.5 mpg conistantly driving it fairly hard.. now if i baby it i get maybe 16 and if i drive it semi hard 15mpg... but the biggest problem is it hesitates going up to 3500rpm then all of a sudden like jolts for 500rpm then dies back down and slowly goes up.... would this flash help? any comments from the 04 owners with this?

Yeah I think there is something wrong with your car. Maybe the plugs or wires need to be replaced. If there's something wrong the flash won't help. You need to get your car fixed.
Reply
Old Nov 28, 2006 | 12:37 PM
  #91  
Landon's Avatar
Blonde Bastard
 
Joined: Jul 2006
Posts: 733
Likes: 1
From: Ellicott City, Maryland
Originally Posted by shaunv74
Yeah I think there is something wrong with your car. Maybe the plugs or wires need to be replaced. If there's something wrong the flash won't help. You need to get your car fixed.
Oh I know a flash will not do anything. He was refering to a post I made (that I accidentally deleted) refering to another post in here where a guy disconnected his battery and reconnected it and the car didnt start.

Astral do you still have the notice e-mail with my original message with the link to the other post? If so could you post it back in here for me because I cant find the link anymore
Reply
Old Nov 28, 2006 | 02:04 PM
  #92  
Astral's Avatar
Purveyor of fine bass
 
Joined: Aug 2003
Posts: 1,618
Likes: 2
From: Worcester, MA
Sorry Landon, I don't have that notice e-mail.
Reply
Old Nov 28, 2006 | 10:53 PM
  #93  
shaunv74's Avatar
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
Whoops. I just didn't want to see the guy hurt his car and then spend money on something that wasn't going to help.
Reply
Old Nov 29, 2006 | 04:48 AM
  #94  
Landon's Avatar
Blonde Bastard
 
Joined: Jul 2006
Posts: 733
Likes: 1
From: Ellicott City, Maryland
Originally Posted by shaunv74
Whoops. I just didn't want to see the guy hurt his car and then spend money on something that wasn't going to help.
Its all good man, I appreciate the input. Like I said though I will have Rosenthal test everything out when I take it up there next week and if everything checks out RB flash here I come .

Hey to the people in here that have it, what do you think of the flash? any noticeable differences? or is it minimal? Is it worth the 300 bucks?
Reply
Old Nov 29, 2006 | 07:21 AM
  #95  
Trekk's Avatar
Goat rider
 
Joined: Feb 2006
Posts: 587
Likes: 0
I just shipped out my PCM today. Now to wait.......... I should have it back around Dec 7. This is what sucks about getting a flash, not only do you have to wait for it to make it to them, you also have to wait for it to come back.

You could look at it this way, the cooling fan mod is 150$. The flash has that mod in it so your sort of only paying 150$ for the flash.

I got lucky and got the flash for free, so I'm gonna take some of that money I saved and put my car on a dyno to see what the HP looks like on a 06 and with the flash.
Reply
Old Nov 29, 2006 | 07:46 AM
  #96  
Landon's Avatar
Blonde Bastard
 
Joined: Jul 2006
Posts: 733
Likes: 1
From: Ellicott City, Maryland
Originally Posted by Trekk
I just shipped out my PCM today. Now to wait.......... I should have it back around Dec 7. This is what sucks about getting a flash, not only do you have to wait for it to make it to them, you also have to wait for it to come back.

You could look at it this way, the cooling fan mod is 150$. The flash has that mod in it so your sort of only paying 150$ for the flash.

I got lucky and got the flash for free, so I'm gonna take some of that money I saved and put my car on a dyno to see what the HP looks like on a 06 and with the flash.
Did you dyno before you sent the ECU off that way you have a baseline?
Reply
Old Nov 29, 2006 | 08:29 AM
  #97  
crimson-rain's Avatar
Registered
 
Joined: Nov 2004
Posts: 621
Likes: 0
i'm planning on dynoing my car soon. i've got an AEM CAI and a Borla catback. I also have updated plugs and the R flash. I'll see what I put down and then send my ECU to RB. Can't wait to see the results considering I have none RB CAI and catback. But I may not get to do this until January. It's Christmas, the time of merriness, cheer, and brokeness.
Reply
Old Nov 29, 2006 | 08:32 AM
  #98  
nycgps's Avatar
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 36
From: Planet Earth
R flash ? Did ya do the emission update yet ? IT should bring you to "S" flash

Last edited by nycgps; Nov 29, 2006 at 08:37 AM.
Reply
Old Nov 29, 2006 | 10:36 AM
  #99  
Trekk's Avatar
Goat rider
 
Joined: Feb 2006
Posts: 587
Likes: 0
Originally Posted by Landon
Did you dyno before you sent the ECU off that way you have a baseline?
No cause I dont really care to know what it had stock, I'll just assume it was in the 185 area like most people. Most dyno could have a 5-10 hp error anyways considering the runs would be 3 weeks or so a part and maybe differant weather.

I just wanna see what the numbers are and what the wideban will pick up with the new curve.
Reply
Old Nov 29, 2006 | 10:56 AM
  #100  
Landon's Avatar
Blonde Bastard
 
Joined: Jul 2006
Posts: 733
Likes: 1
From: Ellicott City, Maryland
Originally Posted by nycgps
R flash ? Did ya do the emission update yet ? IT should bring you to "S" flash
Thats the new flash that cuts the fuel on start up and adds more oil right? (the latest recall)
Reply

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 01:43 PM.