Polyurethane Exhaust Hangers!
09-03-2009, 11:00 AM
#1
Polyurethane Exhaust Hangers!
Finally complete kits for the RX-8 to stop that clunking and banging noise from your exhaust!
Stock Exhaust Hangers are made of rubber, which is squishy and floppy which causes your Exhaust to shift and move excessively under heavy cornering, braking, or even on the highway at higher speeds when going over bumps, potholes, and such.
The Solution is Polyurethane Hangers that are much firmer and will not flex like the stock rubber hangers. When you go over bumps, do heavy cornering the stock hangers will flex at the point that your exhaust will make excessive noises and hit parts of the under body. This is the perfect solution to stop those noises!
Sold as a complete set of 6 Hangers!
This is a complete kit that will replace all of your stock rubber hangers from the Catback all the way back and will work with all aftermarket and OEM exhaust systems.
This kit will not lower or raise your exhaust at all so you can rest assured that it will stay planted and in OEM position!
Orders can be completed on the site Here
Stock Exhaust Hangers are made of rubber, which is squishy and floppy which causes your Exhaust to shift and move excessively under heavy cornering, braking, or even on the highway at higher speeds when going over bumps, potholes, and such.
The Solution is Polyurethane Hangers that are much firmer and will not flex like the stock rubber hangers. When you go over bumps, do heavy cornering the stock hangers will flex at the point that your exhaust will make excessive noises and hit parts of the under body. This is the perfect solution to stop those noises!
Sold as a complete set of 6 Hangers!
This is a complete kit that will replace all of your stock rubber hangers from the Catback all the way back and will work with all aftermarket and OEM exhaust systems.
This kit will not lower or raise your exhaust at all so you can rest assured that it will stay planted and in OEM position!
Orders can be completed on the site Here
Last edited by Race Roots; 09-20-2009 at 09:36 AM.
09-20-2009, 05:24 PM
#6
Rice Police
Join Date: Nov 2006
Location: California
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
.
09-21-2009, 03:35 PM
#8
Registered
iTrader: (1)
Join Date: Jun 2009
Location: Philly Burbs
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Urethane hangars are a must for most vehicles with aftermarket exhausts, especially since we pay top dollar for a quality exhaust... i made sure I had them when I did my exhaust for my MSP, and wont think twice about using them when the time comes for the rx8 
09-21-2009, 04:09 PM
#9
Registered User
iTrader: (2)
Join Date: Oct 2008
Location: Dallas, Texas
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
I have issues with the exhaust once heated up hitting the heat shield and rattling. Ive managed to solve it for the most part but if i cant completely fix the problem im sure i will be buying these lol
04-16-2010, 07:23 AM
#13
I can split it, if you only wanted 3 it would be half the price plus $10 for shipping.
You can shoot me a paypal at sales@raceroots.com and I can get it shipped out.
Thread
Thread Starter
Forum
Replies
Last Post
arexatemate
RX-8 Parts For Sale/Wanted
6
10-28-2019 08:16 AM
