Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

JIC titanium exhaust

Thread Tools
 
Rate Thread
 
Old Jul 16, 2004 | 05:29 PM
  #1  
Twinturbo2800's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 295
Likes: 0
JIC titanium exhaust

i was wondering if any1 had some clips of the titanium exhausts?


btw can some1 clear this up for me? can i get a midpipe and pass expections? or does the midpipe eliminate the cat ?

so would i have to go High flow cat/exhaust?



thanks - josh
Reply
Old Jul 16, 2004 | 07:39 PM
  #2  
mikeb's Avatar
100% Italian
 
Joined: Jul 2003
Posts: 9,422
Likes: 0
From: orange,ca
I have the ss JIC
and it sounds like the stock exhaust
Reply
Old Jul 19, 2004 | 12:28 AM
  #3  
Kel Rx8's Avatar
if your not 1st your last
 
Joined: Jan 2004
Posts: 4,889
Likes: 1
From: Jersey & Peru
even at high rpms mike ?
i dont think there is one state you will pass inspection except florida
without a cataltic converter.
only reason i know florida is because here isnt any inspection centers.lol
p.s midpipe usually is a elimantion of cat or cats so....
Reply
Old Jul 20, 2004 | 03:30 PM
  #4  
shelleys_man_06's Avatar
Not anymore
 
Joined: Mar 2004
Posts: 2,423
Likes: 0
From: NorCal
Yeah. Florida doesn't have inspections. But then again, it's Florida.

I hate to sound like a butt, but what is the point of having a titanium exhaust system? Does it flow better than stainless steel? With respect to the weight, I do not think a titanium exhaust system is worth the money. If you think about it, the change in the weight is small compared to stainless steel. Well, at least JIC's exhaust sounds like the stocker's; I would dread it if my exhaust sounded like a bunch of angry wasps.
Reply
Old Jul 20, 2004 | 03:36 PM
  #5  
Hybrid-RX8's Avatar
Registered User
 
Joined: Feb 2004
Posts: 331
Likes: 0
From: Toronto, Ontario
Titanium..the really difference is just weight..
Reply
Old Jul 20, 2004 | 07:42 PM
  #6  
shelleys_man_06's Avatar
Not anymore
 
Joined: Mar 2004
Posts: 2,423
Likes: 0
From: NorCal
How much does the stock exhaust weight?
Reply
Old Jul 20, 2004 | 10:51 PM
  #7  
mikeb's Avatar
100% Italian
 
Joined: Jul 2003
Posts: 9,422
Likes: 0
From: orange,ca
I think stock is 40 something pounds and the TI is like 28
Reply
Old Jul 20, 2004 | 11:50 PM
  #8  
shelleys_man_06's Avatar
Not anymore
 
Joined: Mar 2004
Posts: 2,423
Likes: 0
From: NorCal
12 lbs? That's like the weight of an average bowling ball. Does anyone know how it affects the dynamics of the car?
Reply
Old Jul 21, 2004 | 05:02 AM
  #9  
Japan8's Avatar
Int'l Man of Mystery
 
Joined: Jan 2004
Posts: 3,651
Likes: 0
From: Central Florida
There are some Ti systems that are significant improvements in weight... Ganador...
Reply
Old Jul 21, 2004 | 07:13 AM
  #10  
shelleys_man_06's Avatar
Not anymore
 
Joined: Mar 2004
Posts: 2,423
Likes: 0
From: NorCal
What about significant improvements in power, torque?
Reply
Old Jul 21, 2004 | 09:00 AM
  #11  
smrx8's Avatar
Registered User
iTrader: (1)
 
Joined: Jan 2004
Posts: 1,752
Likes: 0
From: WHITE HOUSE
all the exhaust make about the same horsepower no more then 10hp even 10 hp sounds high . b
Reply
Old Sep 18, 2004 | 11:34 PM
  #12  
njItalianboy's Avatar
Registered User
 
Joined: Jul 2004
Posts: 23
Likes: 0
From: fairfield,New Jersey
do you guys think the borla is good because on rx8 store you see a good pic of the borla exhaust and it looks like it gives you a great gain because of the thick inch piping and less curves unlike the other exhausts like greddy
Reply
Old Sep 19, 2004 | 01:05 AM
  #13  
CypressRX8's Avatar
CypresRX8
 
Joined: Sep 2004
Posts: 14
Likes: 0
From: Cypress, CA
Originally Posted by mikeb
I have the ss JIC
and it sounds like the stock exhaust
Me too, but a little louder than stock at higher RPM's. The Borla sounds similiar too.
Do you find the K&N intake takes away power? I've just got the K&N intake and I'm noticing a power loss or is it just me?

CypressRX8.
Reply
Old Sep 19, 2004 | 01:32 AM
  #14  
Fanman's Avatar
Registered User
 
Joined: Nov 2003
Posts: 3,281
Likes: 1
From: Glendale, CA
Originally Posted by CypressRX8
Me too, but a little louder than stock at higher RPM's. The Borla sounds similiar too.
Do you find the K&N intake takes away power? I've just got the K&N intake and I'm noticing a power loss or is it just me?

CypressRX8.
A couple people have done dynos on the K&N and found that it gives up hp on the low end & mid range, and gets some back on the high end.

The stock exhaust was a lot heavier than the titanium version. In general Titanium units are 50%-60% lighter than a similar stainless steel version. You could save 20-30 lbs. off this car.

This is an excerpt from the description of the Amuse Titanium unit for the RX8 :

"Powerhouse Amuse's Titanium Dual Exhaust for the RX8. Saves more than 52% over the stock exhaust weight. (17.6kg (38.72 lbs.)-->8.4kg (18.48 lbs.) Comes in 3 different styles. Main pipe is 70mm, splits to dual 54mm pipes with 90mm tips."


JIC claims their unit is only 9 lbs (which would be almost 30 lbs. off the stock unit) but I would question the durabilty of a unit that comes in at 25% of the weight of a stock muffler unit, and 1/2 it's competitors.

Last edited by Fanman; Sep 19, 2004 at 01:45 AM.
Reply
Old Sep 18, 2008 | 01:52 PM
  #15  
Kadavr's Avatar
RSTi 402hp @ 17psi :(
 
Joined: May 2008
Posts: 154
Likes: 0
From: Mtl
I found this clip of the JIC titanium exhaust http://www.youtube.com/watch?v=slwBXtE8m2M and it sounds a lot different from the stock exhaust, so I was hoping to find out if the person who uploaded that clip is a member here on the forum and could say if he has fitted a midpipe as well, if so which one... on youtube it says he just has a mazdaspeed intake...
Reply
Old Sep 24, 2008 | 04:40 PM
  #16  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
It's just a MS intake. The exhaust weighs 17 lbs I think, not 9. The muffler weighs 9 if my memory is correct. Just ask me whatever you want to know. I'd say get something with Ti tips and leave it at that. $$$$$$ for the full Ti version.
Reply
Old Sep 24, 2008 | 05:03 PM
  #17  
deadphoenix52's Avatar
meh.
 
Joined: Oct 2006
Posts: 1,658
Likes: 0
From: fwb, fl
Originally Posted by Kadavr
I found this clip of the JIC titanium exhaust http://www.youtube.com/watch?v=slwBXtE8m2M and it sounds a lot different from the stock exhaust, so I was hoping to find out if the person who uploaded that clip is a member here on the forum and could say if he has fitted a midpipe as well, if so which one... on youtube it says he just has a mazdaspeed intake...
wow. congratulations. almost 4 years to the day.
Reply
Old Sep 24, 2008 | 05:59 PM
  #18  
Im_DANomite's Avatar
I love GOOOLD
iTrader: (1)
 
Joined: Dec 2004
Posts: 2,845
Likes: 3
From: Severn, MD
i have the titanium full exhaust by JIC. it's way more lighter than the stock unit and RB REV8 system. i never weighed it, but i can definately pick up the entire JIC unit with a couple fingers. the titanium holds up very well and the quality of this exhaust is awesome. never had a problem with it even with my turbo.

if you got the money, spend it.
Reply
Old Sep 24, 2008 | 06:18 PM
  #19  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,141
Originally Posted by deadphoenix52
wow. congratulations. almost 4 years to the day.
lol ...
Reply
Old Sep 25, 2008 | 09:20 AM
  #20  
Kadavr's Avatar
RSTi 402hp @ 17psi :(
 
Joined: May 2008
Posts: 154
Likes: 0
From: Mtl
I'd imagine there is no difference in the tone of the exhaust between the titanium and the steel version, right?
Reply
Old Oct 30, 2008 | 08:17 PM
  #21  
IXC-RX8's Avatar
Registered
 
Joined: Oct 2007
Posts: 43
Likes: 0
hello from barcelona

I have installed on my 8 the catback of JIC semititanium. I also installed a race pipe and cai HKS...sounds very good for me.

regards
Ivan
Reply
Old Oct 31, 2008 | 08:30 AM
  #22  
Kadavr's Avatar
RSTi 402hp @ 17psi :(
 
Joined: May 2008
Posts: 154
Likes: 0
From: Mtl
post a sound clip!
Reply
Old Oct 31, 2008 | 08:40 AM
  #23  
IXC-RX8's Avatar
Registered
 
Joined: Oct 2007
Posts: 43
Likes: 0
does not do much justice to the clip as it sounds in reality, but it's the only clip I have for the moment.

http://es.youtube.com/watch?v=h_da8RXbCis
Reply
Old Nov 1, 2008 | 10:55 AM
  #24  
Kadavr's Avatar
RSTi 402hp @ 17psi :(
 
Joined: May 2008
Posts: 154
Likes: 0
From: Mtl
Nice, thanks fo rthe vid! Sounds awesome. What kind of racepipe do you have?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hunterkelley24
Series I Engine Tuning Forum
14
Jun 14, 2022 08:32 AM
mdl0209
Series I Trouble Shooting
14
May 23, 2019 05:46 PM
fourwhls
RX-8's For Sale/Wanted
7
Feb 20, 2019 05:16 PM
yurcivicsux
Series I Major Horsepower Upgrades
192
Sep 12, 2017 10:54 PM
Jb4ker96
Series I Trouble Shooting
0
Sep 27, 2015 10:06 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 03:13 AM.