how much powers can the stock automatic transmission handle?
#1
how much powers can the stock automatic transmission handle?
Hi I have a 2005 Shinka edition with the automatic transmission. i was planning on supercharging it using mazdatrix kit but when i told them it was an automatic they had no idea what the transmission could hold or was capable of. Any help would be greatly appreciated.
#2
Administrator
iTrader: (7)
the AT is very durable, Phil's8 is pushing over 260 to the wheels and hasn't had problems.
It should be capable of handling 300whp +
P.S. which kit? The Procharger?
It should be capable of handling 300whp +
P.S. which kit? The Procharger?
#3
Transmission figures should be given in nM or lb\ft, power is just a rough estimate
It should handle that kind of build but are you sure you want to go the centrifugal supercharger way?
It should handle that kind of build but are you sure you want to go the centrifugal supercharger way?
#4
BearBlasterExtraordinair!
iTrader: (3)
That said, high amounts of torque are harder on transmissions than horsepower. One nice thing about automatics is that since there is no direct link between the tranny and engine, driveline shock is lessened a little bit.
#6
Jeff,
I just spoke with Dave he is willing to try 14/15psi if the initial low boost tuning works out
I have a feeling you are right, the auto will take anything the motor can make...
I just spoke with Dave he is willing to try 14/15psi if the initial low boost tuning works out
I have a feeling you are right, the auto will take anything the motor can make...
Thread
Thread Starter
Forum
Replies
Last Post
ASH8
Series II Technical and Trouble shooting
7
10-30-2021 12:50 PM
Audio Concepts ATL
New Member Forum
21
09-26-2021 01:59 PM