Silverarrow

Ok, i have the Emanage that came with the greddy, and i am wondering if the hookup is similar to the canzoomer. My question is with the harness is there anyway to get the cpu cover to go back on? the greddy one may be different and i may be barking up the wrong tree, but i cannot for the life of me figure out how to get that cover back on!

davefzr

Follow the instructions laid out in the CZ installation guide found here.

https://www.rx8club.com/series-i-engine-tuning-forum-63/stage-1-install-instructions-pictures-18394/

I also posted some information about how my installation went here.

https://www.rx8club.com/showpost.php...3&postcount=90

In short, you dont use the cover of the ecu box anymore which makes room for the canzoomer to fit inside the box. The canzoomer unit sits nicely on top of your ecu and the cover will fit once some room has been cleared out.

You are going to love it. I just installed mine a few days ago and it feels like the original K flash.. If you havent felt that flash, it's a good thing.

davefzr

Oh.. just read your post again. If you purchased the Greddy E-Manage you will not be able to fit it inside the ecu box as you would if you had purchased the Canzoomer unit. I believe it will sit outside exposed on top of the ecu box.

Or here... This is for your turbo system?

http://www.mazdamaniac.com/images/rx8/turbo/final_1.jpg