can't find turbo, SO NEXT BEST THING
#28
Registered User
Thread Starter
Join Date: Jul 2003
Location: Elmwood Park NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
The Renesis engine is for sale, if anyone wants, it, and the I have a spare 6 speed also, PM me IF YOU are a seriou buyer
P.S. Trust me!!! i plan on injoying every single drop of it,
P.S. Trust me!!! i plan on injoying every single drop of it,
#29
Originally posted by ACOSTARACING
as of right now, stock. We would try it, if it breack then i will probally put a FD Tranny, And maybe a FD Rear
as of right now, stock. We would try it, if it breack then i will probally put a FD Tranny, And maybe a FD Rear
Awesome project...
#31
Registered User
Thread Starter
Join Date: Jul 2003
Location: Elmwood Park NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Any Rx-8 owner who are near Acosta Racing, is more than welcome to come in, and see the project,,,,( BUT NO PICTURES OF THE OTHER PROJECTS IN THE SHOP) pm me, anyone that's intrested
#38
Registered User
Thread Starter
Join Date: Jul 2003
Location: Elmwood Park NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
The Electronics is already done. That was actually the first thing they did.
The turbo is a T78 Dual Ballbearing turbo, By Innovative turbo System. It is a Q-trim wheel, with an A/R of 1.32
The turbo is a T78 Dual Ballbearing turbo, By Innovative turbo System. It is a Q-trim wheel, with an A/R of 1.32
#39
Registered User
Thread Starter
Join Date: Jul 2003
Location: Elmwood Park NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
The reason we wanted to use the 3 Rotor intake Manifold, is because i want the car to look like that engine actually came with the car ( hehe) remember this is goin to be a show car/ race car. for the street.
#41
Registered User
Thread Starter
Join Date: Jul 2003
Location: Elmwood Park NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
well we are goin to run two muffer to keep it dual. it muffer would be 2 1/2 and is goin to split for a Y from the down pipe. the down pipe will be 5" And we will be using Magnaflow muffer all stainless steal. We are very very excite about this project
#44
Registered User
Thread Starter
Join Date: Jul 2003
Location: Elmwood Park NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
The turbo we are using, comes with the Exhaust Housing 5". Remember guys the 20b engine creates alot of heat. So we need to bring the heat out as soon as possible. If not we'll have back-pressure. With Back pressure i'll be cracking the manifold, and the motor will suffer.
#45
mostly harmless
Join Date: Jun 2002
Location: Greater Vancouver Area, BC
Posts: 3,440
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ACOSTARACING
The turbo we are using, comes with the Exhaust Housing 5".
The turbo we are using, comes with the Exhaust Housing 5".
#47
Registered User
Thread Starter
Join Date: Jul 2003
Location: Elmwood Park NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Alot of work and alot of wiring, we made everything harder cause we kept the hole suspension stock. So that way i wont get no bumpstear or nothing. Because we did it this way, we had to custom make new mounts, oil pan, and couple more parts. You will have to call up the shop, for more info, speack to them
#48
Registered User
Thread Starter
Join Date: Jul 2003
Location: Elmwood Park NJ
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Any one here from the east cost would like to come to the shop and check out the project, you are welcome too. I know alot of people wont believe till they see.