Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

BHR Midpipe + What catback?

Thread Tools
 
Rate Thread
 
Old Mar 31, 2011 | 07:35 AM
  #1  
Alex FX4's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 19
Likes: 0
BHR Midpipe + What catback?

Well from what i read, the BHR midpipe is the best at removing rasp. I will be buying the non cat version. Now i want a cat back that does not allow any rasp through either.

I like loud but i don't like ear piercing rasp if that makes sense. Just a smooth rounded tone and a little bit of a scream at really high rpm's would be perfect.

I also want a dual system. Also would headers help get this sound?
Reply
Old Mar 31, 2011 | 07:39 AM
  #2  
fuztupnz's Avatar
Phone Booth'd
iTrader: (4)
 
Joined: May 2009
Posts: 2,441
Likes: 1
From: Cincinnasty
Most of the cat-backs are pretty rasp free on their own. A lot of the rasp comes from the midpipe, but you should be safe with the BHR unit. Headers would more than likely add some rasp.

Since you want dual tips, I'd say go with the borla. Borla + BHR mp sounds incredible.
Reply
Old Mar 31, 2011 | 08:06 AM
  #3  
Alex FX4's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 19
Likes: 0
Originally Posted by fuztupnz
Most of the cat-backs are pretty rasp free on their own. A lot of the rasp comes from the midpipe, but you should be safe with the BHR unit. Headers would more than likely add some rasp.

Since you want dual tips, I'd say go with the borla. Borla + BHR mp sounds incredible.
are there any real performance gains from headers vs the stock manifold? Borla exhausts sound good, i have had them on other cars, but they seem to produce a lot of cabin drone. Is that the case with the RX8?
Reply
Old Mar 31, 2011 | 08:19 AM
  #4  
bse50's Avatar
#50
 
Joined: Nov 2007
Posts: 7,521
Likes: 11
From: Caput Mundi
the mazdaspeed one has a nice sound, not really loud and doesn't drone.
Reply
Old Mar 31, 2011 | 08:40 AM
  #5  
Chris's Avatar
Turbo Member
iTrader: (10)
 
Joined: May 2006
Posts: 2,496
Likes: 29
From: Tampa, FL
Originally Posted by Alex FX4
are there any real performance gains from headers vs the stock manifold? Borla exhausts sound good, i have had them on other cars, but they seem to produce a lot of cabin drone. Is that the case with the RX8?
no.
Reply
Old Mar 31, 2011 | 08:43 AM
  #6  
Alex FX4's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 19
Likes: 0
Originally Posted by bse50
the mazdaspeed one has a nice sound, not really loud and doesn't drone.
From what others say, it has a similar note to the borla system. I am going to try to find some HQ videos of them, i wish people around here had these exhausts.

Originally Posted by RWD+LSD=Zoom
no.
is that for both drone and headers or what?
Reply
Old Mar 31, 2011 | 11:20 AM
  #7  
Cattywampus's Avatar
Turbos blow!!
 
Joined: Oct 2004
Posts: 1,584
Likes: 0
From: my engine bay
I have the Hymee and it has a really sweet tone throughout the revs. The BHR pipe doesn't really change the tone of the exhausts as much as other pipes do. So you have to find an exhaust that you like then mate the pipe to it. I know MySQL had rasp with his Borla even with a turbo splitting the system. He also had a shitty midpipe at the time so that could have been the cause.

Last edited by Cattywampus; Mar 31, 2011 at 11:23 AM.
Reply
Old Apr 1, 2011 | 07:30 AM
  #8  
Alex FX4's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 19
Likes: 0
Originally Posted by Cattywampus
I have the Hymee and it has a really sweet tone throughout the revs. The BHR pipe doesn't really change the tone of the exhausts as much as other pipes do. So you have to find an exhaust that you like then mate the pipe to it. I know MySQL had rasp with his Borla even with a turbo splitting the system. He also had a shitty midpipe at the time so that could have been the cause.

If i had to put the sound into words it would be deep and not too loud at low load. When the pedal is to the medal it screams loudly but does not produce the ear peircing type of rasp.

http://www.youtube.com/watch?v=473kVZ8o83E

that exhaust is almost perfect (i know the sound of the engine is different). if youu go to 0:38 on that video you'll hear the engine screaming and maybe provide i small amount of rasp which is ok. The rasp i don't like is what you hear on cheap civic exhausts that literally stab you in the ears.

With this genesis its perfect except i would like a little more quietness at low load.



idk if this helps anyone, but i have no access to these exhaust except youtube.
Reply
Old Apr 4, 2011 | 07:27 AM
  #9  
Alex FX4's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 19
Likes: 0
Well after a lot of thought and research i decided to get the mazdaspeed catback. Basically it seems the sound of the mazda speed exhaust is a lot smoother than the sound of the borla.

The mazdaspeed is still aggressive but isn't as sharp if that makes sense, also the mid pipe should bring out the sound very well.


So quick question, a borla and midpipe will backfire, will the mazdaspeed do that?
Reply
Old Apr 4, 2011 | 07:28 AM
  #10  
bse50's Avatar
#50
 
Joined: Nov 2007
Posts: 7,521
Likes: 11
From: Caput Mundi
Yes
Reply
Old Apr 4, 2011 | 07:36 AM
  #11  
Alex FX4's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 19
Likes: 0
Originally Posted by bse50
Yes
Ok well does it only happen after letting off at high rpm's. There are some situations that i would not want a backfire.
Reply
Old Apr 4, 2011 | 07:38 AM
  #12  
bse50's Avatar
#50
 
Joined: Nov 2007
Posts: 7,521
Likes: 11
From: Caput Mundi
It depends mostly on the tune you're on. It's hard to backfire when cruising.
Reply
Old Apr 4, 2011 | 07:50 AM
  #13  
Alex FX4's Avatar
Thread Starter
Registered User
 
Joined: Mar 2011
Posts: 19
Likes: 0
Originally Posted by bse50
It depends mostly on the tune you're on. It's hard to backfire when cruising.
yea from what i see on youtube it seems that it mostly happens when shifting with the pedal to the floor to reving to 9k and letting off.

i guess ill see what its like when it gets here.


Also what size is the rx8 stock exhaust? the BHR midpipe is 3" but are the stock headers and mazdaspeed exhaust 3"?

Last edited by Alex FX4; Apr 4, 2011 at 07:56 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Carbon8
RX-8's For Sale/Wanted
42
Feb 27, 2020 08:39 AM
qtipconnoisseur
RX-8 Parts For Sale/Wanted
9
Oct 29, 2015 07:19 PM
olyrx7
Canada For Sale/Wanted
2
Oct 26, 2015 09:23 AM
Quiggs321
New Member Forum
19
Sep 30, 2015 05:34 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:12 PM.