Agency Power Under driven Crank Pulley
06-03-2010, 08:35 PM
#1
Registered User
Thread Starter
Join Date: Nov 2009
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Agency Power Under driven Crank Pulley
hey everyone i was curious if anyone has this pulley and if its worth getting and if there is a positive difference or what the flaws are thank you
06-03-2010, 09:31 PM
#7
Speaking from someone who has this pulley... don't waste your time or money unless you want to pay for the "bling" factor.
You don't need an AccessPORT, but you do need to clear/reset the NVRAM (eshaft profile).
The two types of memory is NVRAM and KAM.
You don't need an AccessPORT, but you do need to clear/reset the NVRAM (eshaft profile).
The two types of memory is NVRAM and KAM.
06-03-2010, 09:48 PM
#8
Registered User
Join Date: Jan 2006
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it's the most useless mod I've done to my car. You will not feel any difference except the aggravation of having a CEL come on.
Having said, that you can buy mine for a $100!!!! Big savings off the retail price.
Having said, that you can buy mine for a $100!!!! Big savings off the retail price.
06-04-2010, 08:53 AM
#9
My 8 looks like a Smurf
iTrader: (4)
Join Date: Sep 2007
Location: Ottawa, ON, Canada
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
I have it on my car, it was installed by the previous owner.
Having driven other RX-8s, I can tell you that I wouldn't have spent the money on it. The only, barely noticeable difference is that revs drop a tad faster when you clutch in. Then again that may be completely in my head
Having driven other RX-8s, I can tell you that I wouldn't have spent the money on it. The only, barely noticeable difference is that revs drop a tad faster when you clutch in. Then again that may be completely in my head
Thread
Thread Starter
Forum
Replies
Last Post
