Savannah Rx-8 Thread
#1
Registered
Thread Starter
Join Date: May 2012
Location: Savannah
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Savannah Rx-8 Thread
Welcome to the Savannah, GA Rx8 Club's thread. This thread is so that it may be used for club member's to talk and plan meets.
Rules are simple.
Follow RX8 Club Rules.
Things that won't be tolerated:
foul language
advertising without permission from RX8Club
Savannah rotary club welcomes all forms of rotaries. Las meet we had was at Hooters on 95 and 204. Most of us own RX-8 to so all welcome.
Rules are simple.
Follow RX8 Club Rules.
Things that won't be tolerated:
foul language
advertising without permission from RX8Club
Savannah rotary club welcomes all forms of rotaries. Las meet we had was at Hooters on 95 and 204. Most of us own RX-8 to so all welcome.
#7
Registered
Thread Starter
Join Date: May 2012
Location: Savannah
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Well last weekend we started to work on Ed's 20B block. Here are some pictures of the progress so far. I use my sand blaster to clean the 3 housings.
Last edited by Javier20b; 05-23-2012 at 08:23 AM.
#11
Registered
Thread Starter
Join Date: May 2012
Location: Savannah
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
No man I haven't gone to Roebling yet, but some of the guys have. I’m getting ready to PCS out of Savannah but the rest of the guys will be around. We are trying to set up for a big meet with both the RX7 guys and the Rx8 guys before I leave since I’ve been building most of the engines and stuff.
#14
Registered
Thread Starter
Join Date: May 2012
Location: Savannah
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
iits a great mod but now days they make aftermarket apex seals to suit the rx8 rotors. they make stronger seals now. what type of application are you looking for. Also depends on the power your looking to make.
#15
Registered
Thread Starter
Join Date: May 2012
Location: Savannah
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
#16
Registered
iTrader: (3)
Lol-- I already have a pettit built engine with the taller seals. Running their supercharger set up--only 7psi boost but putting down 300 rwhp. Cam did a lot of stuff to this engine. It is NOT ported and has a very conservative tune--lead timing at 14.5 oem split and a/f's in the very low 11's. No cat--lol. Oem header.
I have a bunch more stuff--like all of us eventually do.
By the Way--got a call from Mazmart ( Paul) yesterday) and they are putting on a BIG meet June 16th. I think the rotary MX5 will be there plus a BUNCH of other sweet rides. Yall should cruise up. Great food, good times and unbelieveable lies!
Hope to see you there.
I have a bunch more stuff--like all of us eventually do.
By the Way--got a call from Mazmart ( Paul) yesterday) and they are putting on a BIG meet June 16th. I think the rotary MX5 will be there plus a BUNCH of other sweet rides. Yall should cruise up. Great food, good times and unbelieveable lies!
Hope to see you there.
#18
Registered
Thread Starter
Join Date: May 2012
Location: Savannah
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Starting to get this brand new Cosmo front iron ready for porting.
And the rest I the block.
Ed drilling the bride port.
And finally a little work on Michaels 3rd gen. Beginnings of a haltech install.
And the rest I the block.
Ed drilling the bride port.
And finally a little work on Michaels 3rd gen. Beginnings of a haltech install.
#19
Registered
iTrader: (3)
Drool
The meet will be at Mazmart Saturday June 16th. It's a pretty big meet with great food, Rick E usually shows up and many really sweet Mazdas. The rotary MX5 Paul is building is one I particulaly like looking at.
After the meet some of us will road trip to Road Atlanta and join up with a bunch of fellow Mazda idiots that will be tracking with NASA for the w/e. We will have a huge RV set up etc.
Please come and bring the family with you.
The meet will be at Mazmart Saturday June 16th. It's a pretty big meet with great food, Rick E usually shows up and many really sweet Mazdas. The rotary MX5 Paul is building is one I particulaly like looking at.
After the meet some of us will road trip to Road Atlanta and join up with a bunch of fellow Mazda idiots that will be tracking with NASA for the w/e. We will have a huge RV set up etc.
Please come and bring the family with you.
#22
Drive It Like U Stole It
finally! an active GA thread and close to hinesville...the next meet yall have im going to try to go..not too car savvy and definitely not too rotary savvy but dam i love driving this awesome machine