{ FS } EP RX-8 - SCCA/GLTC/NASA Racecar
#1
SOLD - EP RX-8 - SCCA/GLTC/NASA Racecar
Year: 2004
Make: Mazda
Model: RX-8
Price: $17500
Mileage: 12345
Color: Orange/Grey
Private or Dealer Listing: Private Listing
Location (US State/Canada/Int): GA
Pics: https://drive.google.com/drive/folde...hs?usp=sharing
Logbooked/Prepped for SCCA EP
Speedsource built in 2004 for GrandAm (later Koni Challenge), off the showroom floor, never seen the street
Drivetrain:
· 3 weekend old Renesis, ~210 whp
· Converted to cable throttle
· Ron Davis Radiator, switched fan
· Dual oil coolers
· Tilton 5.5” dual-plate clutch/flywheel
· Hydraulic throwout bearing
· RX-8 Series II transmission
· 5.12 rear gear, Carbonetix differential
· Differential cooler with switched fan and pump
· Stock gas tank with custom pickups (Low and High pressure), no starving to empty
· 3.5” exhaust, wrapped, Borla XR-1 round muffler (101 dB consistently)
Chassis:
· SERIOUS cage: Speedsource GrandAm cage with enhancements for EP, 1.75”x.120” tubing, heavily gusseted, tied to chassis at too many points to count.
· 2394lbs dry
· Fire system plumbed to driver + underhood
· Aftermarket Series II bumper cover
· Front and Rear bumper beams replaced with tubing for weight
· Moderate cutting of chassis for weight reduction, in front of front suspension and rear parcel shelf
· Lexan front/rear glass
· Stock fenders/doors/bodywork
· Front/rear doors gutted but operational
· Dash removed, custom gauge/switch panel
· Removable steering wheel
Brakes:
· Tilton dual master cylinders
· Modified stock pedal with balance bar
· Hydraulic in-line bias lever for rear brakes
· Stock calipers/rotors
· Braided lines
· 3” ducting to fronts
Suspension:
· Koni 2812 aluminum bodied double adjustable shocks, 3 weekends since refreshed
· Speedway style front sway bar, no rear bar
· 2.25” springs in various rates
· Spherical bearings in rear suspension arms
· Custom rear upper shock mounts for increased travel
· 19 17”x8” Racing Hart wheels (~13lbs) with Hoosiers of various ages
Spares:
· Stock Renesis
· Series II transmission
· 2x stock differentials
· 2x aftermarket Series II front bumper covers
· Full suspension with all control arms, front and rear, stock parts, including subframes
· Spare XR-1 muffler with connectors
· New halfshafts
· Stock driveshaft
· Misc bodywork (doors, trunklid, hood, etc)
· Misc hard parts/brakes
· Several Tilton brake master cylinders in different diameters
· 2x Ron Davis radiators
· I’m sure there’s more, bring a BIG trailer
Sub 2:10 at VIR, 1:38 at Road Atlanta, 2:16 NCM, etc, driver-limited.
$17,500 OBO
Located near Atlanta
Last edited by RacerBowie; 04-15-2021 at 12:45 PM. Reason: Sold!
The following users liked this post:
yomomspimp06 (01-19-2021)
#6
Spinning Dorito Junkie
iTrader: (2)
Join Date: Jul 2003
Location: Halifax, Nova Scotia, Canada
Posts: 747
Likes: 0
Received 1 Like
on
1 Post
Still interested if my money ever shows up.
One dumb question, but what are you using for ECU? Is it stock or aftermarket? Assume no driver aids retained? (ABS etc)
One dumb question, but what are you using for ECU? Is it stock or aftermarket? Assume no driver aids retained? (ABS etc)
#7
ECU is Motec standalone. EVERYTHING stock has been removed. No ABS allowed in the class it is currently prepped for.
#8
Still for sale. Had a flurry of interest here lately, but hasn't panned out yet... getting close to the start of racing season (and buy a boat season, just sayin')!
Price drop to $16,500.
Price drop to $16,500.
#11
I apologize, I forgot to update this thread.
It is SOLD, with allllllll spares, to a buddy of mine, should be at the Kentucky hillclimb in a couple of weeks.
How do I mark the thread as sold?
It is SOLD, with allllllll spares, to a buddy of mine, should be at the Kentucky hillclimb in a couple of weeks.
How do I mark the thread as sold?
Thread
Thread Starter
Forum
Replies
Last Post
R(ace)X-8
RX-8's For Sale/Wanted
2
01-07-2020 10:28 AM
JIC Magic
RX-8's For Sale/Wanted
12
12-22-2012 11:37 AM
MiniMeg
Series II Wheels, Tires, Brakes & Suspension
22
10-23-2011 02:10 PM