WTB: Speedsource Sway Bars & Exhaust Manifold
#1
Registered User
Thread Starter
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
Have you tried contacing Speedsource directly? And I wasn't aware they used a different exhaust manifold on their 2 rotor Renesis cars...
#3
No respecter of malarkey
iTrader: (25)
the bar is sold exclusively through Mazdaspeed Motorsports to it's members and I believe it's a front bar only, so limited availability
the same diameter x wall thickness with multiple endlink location holes is available through other sources
for the rear bar I believe they just modify the OE rear bar
the exhaust manifold is tubular and sold directly through SS I believe, again very limited availability so good luck ...
the same diameter x wall thickness with multiple endlink location holes is available through other sources
for the rear bar I believe they just modify the OE rear bar
the exhaust manifold is tubular and sold directly through SS I believe, again very limited availability so good luck ...
Last edited by TeamRX8; 01-03-2008 at 02:12 PM.
#4
Registered User
Thread Starter
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
#5
Be careful with header/exhaust selection. It is my understanding that several of the commonly available header options actually make less HP than the stock exhaust.
You can bet Sylvain and the whole SS crew will be extremely busy between now and the 27th or so(I think they have a race that weekend to go win- )
If it were me, I would either email Speedsource with my needs, or what till after the 24 hour race and call. I doubt anyone else in the country has put the dyno time into renesis exhaust work that they have.
**disclaimer..the opinions expressed are entirely my own, and I have been considered biased on more than one occassion**
You can bet Sylvain and the whole SS crew will be extremely busy between now and the 27th or so(I think they have a race that weekend to go win- )
If it were me, I would either email Speedsource with my needs, or what till after the 24 hour race and call. I doubt anyone else in the country has put the dyno time into renesis exhaust work that they have.
**disclaimer..the opinions expressed are entirely my own, and I have been considered biased on more than one occassion**
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM