dothackRAVE

Did some searching on Google..., but what I found was rather confusing, and wasn't clear on what I'm allowed/not allowed to do...

So I figured I'd just ask straight up. What can I do?

SteveB

Tires. Front Sway bar. Catback. Intake filter. Shocks. Lighter wheels but have to be the same size.

iaus10

http://scca.com/documents/Solo%20Rul...lo_Rules_2.pdf

Section 13 is the one you want.

dothackRAVE

Shocks as in springs? I was looking at some KONIs, but then got worried that the spring rates might not match with the dampening rates.

Front sway bar..., as in the chassis stiffening on the bottom, or the strut bars at the top?

chiketkd

iTrader: (5)

Shocks only -- so konis are okay but you must use the stock springs with them.

The front swaybar runs below the engne bay and connects the chassis to the lower A-arm on each side iirc. The strut tower bar runs along the top of the engine bay (NOT allowed to change this).

edj

shocks only; you cannot replace the springs
front sway bar connects to the lower control arms of the suspension.
you may not change the strut bar at the top shock mount.

mwood

Two most important items:
Tires (DOT R)
Alignment

Also, if you use the SEARCH function on this board, you not only will find a ton of set up information, you will also avoid the wrath of baghead...