{ FS } v8 swap left overs
#1
Registered
Thread Starter
Join Date: Aug 2013
Location: Tampa/AFG
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
v8 swap left overs
Category: Drivetrain
Price: $100
Private or Vendor Listing: Private Listing
Location (US State/Canada/Int): FL
Item Condition: Used
Im not sure what the value of some of these parts are so shoot me some reasonable offers. All parts located in East Tampa.
Parts are from a 2005 rx8 automatic with right at 100k on it.
Shipping is not included in these prices.
Irons $75 each
Housings $100 each
Front cover $20
Alternator $15
Starter $15
A/C compressor $20
Catalytic converter $75. The honeycomb is inside the tube but its is broken into a couple pieces.
All 4 coil packs $20
omp $50
exhaust manifold $15
If there is anything in the photos that you want please message me.
housing 1
housing 1 part2
housing 2
housing 2 part2
Last edited by turboholic; 05-05-2014 at 09:07 AM.
#2
Registered
Thread Starter
Join Date: Aug 2013
Location: Tampa/AFG
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Also have:
Oil cooler lines $40
Oil cooler $20
rubber engine mounts $30 for the pair
metal engine mounts $35 for the pair
throttle body $80
injectors/with brackets $30
oil pan $25
intake manifold $40
maf $20
Oil cooler lines $40
Oil cooler $20
rubber engine mounts $30 for the pair
metal engine mounts $35 for the pair
throttle body $80
injectors/with brackets $30
oil pan $25
intake manifold $40
maf $20
Last edited by turboholic; 05-02-2014 at 03:25 PM.
#8
kevin@rotaryresurrection
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
I'd like to see pics of the top area of the chrome surface on each housing...between the OMP injection holes and the plug hole. If that looks good I will take both rotor housings.
I will also take the OMP and fuel injectors for sure either way.
I will also take the OMP and fuel injectors for sure either way.
#11
kevin@rotaryresurrection
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
so, 100 for both housings, 50 for the OMP, 30 for the injectors, it should all fit in the same box so if you want to get a quote to 37814 and pm me the total I'll take it all.
#13
Moder8
iTrader: (1)
If the irons are not re-usable, I am interested in one with a stationary gear for an art project. I want to assemble a housing and rotor on an iron to show people why my car is faster than their Porsche.. actually I am interested in any non-reusable parts. I do not want the project to take parts off the road.
#14
kevin@rotaryresurrection
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
04Green, I have plenty of bad irons if you are interested in paying shipping.
Still waiting on the original poster to reply to my offer for the rotor housings, omp, and injectors.
Still waiting on the original poster to reply to my offer for the rotor housings, omp, and injectors.
#19
Registered
Thread Starter
Join Date: Aug 2013
Location: Tampa/AFG
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Dear kind sir RotaryResurrection. I private messaged you the following message on April 30th and I never heard from you.
"Hello,
Can you give me a call so I can go over the housings with you. I dont know anything about these engines and want to make sure you are getting usable parts.
You can call now or tomorrow.
719-337-5310
Nick
__________"
"Hello,
Can you give me a call so I can go over the housings with you. I dont know anything about these engines and want to make sure you are getting usable parts.
You can call now or tomorrow.
719-337-5310
Nick
__________"
#20
kevin@rotaryresurrection
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
Dear kind sir RotaryResurrection. I private messaged you the following message on April 30th and I never heard from you.
"Hello,
Can you give me a call so I can go over the housings with you. I dont know anything about these engines and want to make sure you are getting usable parts.
You can call now or tomorrow.
719-337-5310
Nick
__________"
"Hello,
Can you give me a call so I can go over the housings with you. I dont know anything about these engines and want to make sure you are getting usable parts.
You can call now or tomorrow.
719-337-5310
Nick
__________"
It would have been different if I had said "Im kind of interested, I'll think about it" or "I might want them, let me get back to you". If I had said those things, and a buyer came along ready to buy, then I'd have no problem with it.
I did not say either of those. I was ready to buy right then as soon as you posted your paypal account. I said "I will take the housings, omp, and injectors, give me a total shipped and your paypal". To me, that doesn't leave a lot of room for interpretation. I have never committed to a deal and later backed out to my knowledge, so you had no reason to think that I was not a serious buyer.
I just hate having stuff sold out from under me when I have clearly stated my intentions. Some people just have off-the-wall weird ways of selling, I guess. I view yours as neither fair nor honorable.
Last edited by RotaryResurrection; 05-03-2014 at 10:48 AM.
Thread
Thread Starter
Forum
Replies
Last Post
WingleBeast
Series I Wheels, Tires, Brakes & Suspension
22
05-23-2016 09:22 PM
Touge
Canada Forum
0
07-18-2015 05:41 PM