{WTB} Rear Right suspension links&rods
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Rear Right suspension links&rods
Category: Steering & Suspension
Price: $200
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): NJ
Item Condition: Used
I need all the links&rods, and spindle.
I have bent arm/arms I need to replace. My rear right wheel is sitting 0.25 inchi back. Please make sure all the links/rods are straight.
I'm willing to pay around 200obo plus shipping to Tenafly NJ(07670).
If you have one, please let me know.
Thank you!
#3
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
re
I checked everything, and the problem is, nothing seems to be bent.
It could be spindle, but I can't tell.
I went under the car over 20 times, but still can't find out.
Now, I'm starting to hear ball bearing wearing out on that wheel as well.
It could be spindle, but I can't tell.
I went under the car over 20 times, but still can't find out.
Now, I'm starting to hear ball bearing wearing out on that wheel as well.
#4
I got into an accident and hit the same spot. I had to replace my toe rod, camber arm, and knuckle assembly. I didn't know the knuckle was bent until the toe rod couldn't line up properly. I bought all the rods and arms for the passenger side. I have a few left over parts left over that I didn't need. I can't remember exactly which ones, but I'll find out tonight and let you know.
#5
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
I got into an accident and hit the same spot. I had to replace my toe rod, camber arm, and knuckle assembly. I didn't know the knuckle was bent until the toe rod couldn't line up properly. I bought all the rods and arms for the passenger side. I have a few left over parts left over that I didn't need. I can't remember exactly which ones, but I'll find out tonight and let you know.
Ya, I'm going through exact the same thing you did.
There is no way that I can tell which ones are bent unless I have same parts.
Please let me know which one you have.
Thank yoU!
#7
Sorry it took me so long. I've been super busy at work. These are the three remaining parts I have. They're used but they're straight. I just bought all the rods for my accident just in case something else was bent and I didn't see it before. But these are what I have left over.
Thread
Thread Starter
Forum
Replies
Last Post
nowakm99
Series II Technical and Trouble shooting
1
10-09-2015 07:10 AM
To The Wonder
NE For Sale/Wanted
0
09-12-2015 12:35 PM
yankeepicker
Series I Trouble Shooting
3
09-11-2015 05:42 PM