FS: Navi console – carputer, Piaa Wheels, 4080 boxes, Defi gauges, and More.
12-04-2007, 11:21 PM
#1
Travel Junkie
Thread Starter
Join Date: Mar 2002
Location: Allen, Texas
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
FS: Navi console – carputer, Piaa Wheels, 4080 boxes, Defi gauges, and More.
I sold my RX8 and I have a few remaining parts that I need to sell.
I accept paypal only from users with confirmed addresses.
1. Complete Carputer kit $1600.00 SOLD!
Components listed below.
OS and Drivers are included, but software is not included (front ends, GPS, etc.)
Navi Console with Xenarc 700TSV VGA touch screen Installed.
I had bought this console from EBAY already gutted and factory screen and circuit broad removed, but the motor is intact. So the Open and Tilt buttons don’t work, but you can open it by hand with ease. There is a DIY on getting those buttons to work on this forum. See the link below.
https://www.rx8club.com/series-i-interior-audio-electronics-24/hooking-up-used-nav-screen-buttons-87146/
HP Laptop with HP Dock.
Specs
HP Compaq nc6120
15” display 1024X768
Intel Pentium M 1.73GHz
512 MB Ram
40GB HDD
Windows XP pro
12v DC power supply
115v AC power supply
The Dock is already wired for a remote momentary switch to start or shut down the carputer.
Additional parts for the carputer
Mazda PIE adapter to USB w/ audio in – to control next track and play lists with steering wheel buttons.
Extra slot load USB DVD rom – for quick movie change on those long trips. I had this in my the glove box
Bluetooth dongle
Pharos GPS Receiver
Long VGA extension cable
Two 10’ USB cables
Four port USB Hub.
Ground Loop Isolator
More pictures here. http://www.flickr.com/photos/racer13...7603328030664/
2. 19” staggered PIAA Super Rozza wheels and Toyo Proxes T1R SOLD!
Front 19x8.5 42mm offset w/ 245/35/19 65% tread left
Rear 19x10 custom offset w/ 275/30/19 50% tread left
Note* The rear wheels and Rotors were machined and balanced using CNC machinery for a custom offset in order to get them to fit within the wheel wells. The rear rotors are included with this price. Rolling your rear fenders is adviced.
Price Reduction SOLD
More Pictures here. http://www.flickr.com/photos/racer13...7603377028905/
3. Defi Gauge package. SOLD!
I had bought this from Moostafa (https://www.rx8club.com/showthread.p...t=defi+gauges). My lose you gain $480 Shipped
Defi Link Controller
Defi BF Boost Gauge
Defi BF EGT Gauge
Defi BF Oil Temp Gauge w/ sandwich plate-
This is a photo them installed on Moostafa car. I never got around to installing them. They are still sitting in the box.
4. 4080 Boxes both right and left $450 shipped SOLD!
New never used
5. Dash center console (for NON Bose model) w/ JDM NAVI screen holder. $130 Shipped
6. OEM Sunlight silver front bumper $200 (local pickup or willing to meet within 50 miles)
7. OEM cloth seats both front and back. $300 (local pickup or willing to meet within 100 miles)
8. OEM home link mirror w/ complete wiring harness $180 shipped (sorry no photos yet.)
Thanks,
Scott
I accept paypal only from users with confirmed addresses.
1. Complete Carputer kit $1600.00 SOLD!
Components listed below.
OS and Drivers are included, but software is not included (front ends, GPS, etc.)
Navi Console with Xenarc 700TSV VGA touch screen Installed.
I had bought this console from EBAY already gutted and factory screen and circuit broad removed, but the motor is intact. So the Open and Tilt buttons don’t work, but you can open it by hand with ease. There is a DIY on getting those buttons to work on this forum. See the link below.
https://www.rx8club.com/series-i-interior-audio-electronics-24/hooking-up-used-nav-screen-buttons-87146/
HP Laptop with HP Dock.
Specs
HP Compaq nc6120
15” display 1024X768
Intel Pentium M 1.73GHz
512 MB Ram
40GB HDD
Windows XP pro
12v DC power supply
115v AC power supply
The Dock is already wired for a remote momentary switch to start or shut down the carputer.
Additional parts for the carputer
Mazda PIE adapter to USB w/ audio in – to control next track and play lists with steering wheel buttons.
Extra slot load USB DVD rom – for quick movie change on those long trips. I had this in my the glove box
Bluetooth dongle
Pharos GPS Receiver
Long VGA extension cable
Two 10’ USB cables
Four port USB Hub.
Ground Loop Isolator
More pictures here. http://www.flickr.com/photos/racer13...7603328030664/
2. 19” staggered PIAA Super Rozza wheels and Toyo Proxes T1R SOLD!
Front 19x8.5 42mm offset w/ 245/35/19 65% tread left
Rear 19x10 custom offset w/ 275/30/19 50% tread left
Note* The rear wheels and Rotors were machined and balanced using CNC machinery for a custom offset in order to get them to fit within the wheel wells. The rear rotors are included with this price. Rolling your rear fenders is adviced.
Price Reduction SOLD
More Pictures here. http://www.flickr.com/photos/racer13...7603377028905/
3. Defi Gauge package. SOLD!
I had bought this from Moostafa (https://www.rx8club.com/showthread.p...t=defi+gauges). My lose you gain $480 Shipped
Defi Link Controller
Defi BF Boost Gauge
Defi BF EGT Gauge
Defi BF Oil Temp Gauge w/ sandwich plate-
This is a photo them installed on Moostafa car. I never got around to installing them. They are still sitting in the box.
4. 4080 Boxes both right and left $450 shipped SOLD!
New never used
5. Dash center console (for NON Bose model) w/ JDM NAVI screen holder. $130 Shipped
6. OEM Sunlight silver front bumper $200 (local pickup or willing to meet within 50 miles)
7. OEM cloth seats both front and back. $300 (local pickup or willing to meet within 100 miles)
8. OEM home link mirror w/ complete wiring harness $180 shipped (sorry no photos yet.)
Thanks,
Scott
Last edited by racer 13b; 01-17-2008 at 07:14 PM. Reason: price reduction
12-05-2007, 09:02 AM
#6
Travel Junkie
Thread Starter
Join Date: Mar 2002
Location: Allen, Texas
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
12-05-2007, 09:05 AM
#7
Travel Junkie
Thread Starter
Join Date: Mar 2002
Location: Allen, Texas
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
12-05-2007, 09:46 AM
#9
Travel Junkie
Thread Starter
Join Date: Mar 2002
Location: Allen, Texas
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
12-05-2007, 11:23 AM
#12
Ohio State
iTrader: (1)
Join Date: Jun 2005
Location: Back in Cincinnati, Ohio
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Well just let me know if you do decide to part out. Because I will buy the OEM Nav hood and screen and a few other parts from you to make it work in my car. I think I have 1st dibs on it too!
12-18-2007, 10:59 PM
#25
Travel Junkie
Thread Starter
Join Date: Mar 2002
Location: Allen, Texas
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
RicerX1
West For Sale/Wanted
5
01-11-2016 05:59 PM
