fs Custom 10" vented subwoofer box
Thread Starter
Registered User
Joined: Nov 2007
Posts: 20
Likes: 0
From: Galveston, Tx.
fs Custom 10" vented subwoofer box
soldI have a custom subwoofer box for sale. It fits perfectly in little compartment in the trunk. It will hold a 10" woofer. It could be recut to hold a 12" woofer, but that would be a very tight fit. I had a 10" kicker and it was perfect. It is vented. It's made of 3/4" MDP with full carpeting. There is a hole to run the speaker wire thru. The wire was held in place with silicone from the inside, which made an airtight seal. sold
$80 shipped to your door. This is not a cheap flimsy box. Its very sturdy. I upgraded to another box so I dont' need this one anymore.
This is for the box only, no speaker. As you can see from pics 3and4, the box fits perfectly in the cubby hole in the trunk, and there's still about 3in of space left in the cubby hole.
$80 shipped to your door. This is not a cheap flimsy box. Its very sturdy. I upgraded to another box so I dont' need this one anymore.
This is for the box only, no speaker. As you can see from pics 3and4, the box fits perfectly in the cubby hole in the trunk, and there's still about 3in of space left in the cubby hole.
Last edited by goofydragon; Apr 22, 2008 at 06:51 PM. Reason: sold
Thread Starter
Registered User
Joined: Nov 2007
Posts: 20
Likes: 0
From: Galveston, Tx.
The box can easily be moved in and out of the truck. The measurements of the box are 6.25" x 13" x 27".
Keef, if you pick it up, I can lower the price to $60 (maybe $55 if I'm feeling friendly.) PM me.
Keef, if you pick it up, I can lower the price to $60 (maybe $55 if I'm feeling friendly.) PM me.
Ninja Name: Shimojikushi
iTrader: (2)
Joined: Jun 2007
Posts: 263
Likes: 0
From: Hacienda Heights, CA
Can the hole be cut to fit a 10" square??....probably an obvious answer..
If not how sure are you it will fit a 12" inch....might throw a 12" Compvt
Good price...most likely ill take it
If not how sure are you it will fit a 12" inch....might throw a 12" Compvt
Good price...most likely ill take it
Last edited by xl2oGel2x; Apr 21, 2008 at 06:54 PM.
Thread Starter
Registered User
Joined: Nov 2007
Posts: 20
Likes: 0
From: Galveston, Tx.
it can be cut to fit a square sub. I wouldn't recommend this box for a 12" sub as the fit would be extremley tight.
Now that you have me thinking about it, a square 10" would look really nice.
Now that you have me thinking about it, a square 10" would look really nice.
Ninja Name: Shimojikushi
iTrader: (2)
Joined: Jun 2007
Posts: 263
Likes: 0
From: Hacienda Heights, CA
Hold on a sec. The L5 requires 6 3/16 mounting depth. The box is 6.25 deep. Is that the mounting depth or total height of the box. Cause if not the L5 might not fit if that's the total height because the wall width may be 1/2 inch or so.
Edit: nvm I'll just use a spacer if I need to
Edit: nvm I'll just use a spacer if I need to
Last edited by xl2oGel2x; Apr 22, 2008 at 06:00 AM.
Ninja Name: Shimojikushi
iTrader: (2)
Joined: Jun 2007
Posts: 263
Likes: 0
From: Hacienda Heights, CA
AHAH yes its mine....awaiting arrival....if you guys were wondering I decided on the same set up with the 10" Kicker CVr.....only temp while I save up to get some serious custom work done....
Thread
Thread Starter
Forum
Replies
Last Post
Danield97
Series I Trouble Shooting
1
Sep 30, 2015 05:59 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
Sep 27, 2015 07:38 PM
