tsx

18x7.5 +51 silver with polished lip. Just so whoever is interested knows, these need a skinny non-tapered lug. Probably Muteki lugs or anything similar.
Here are some pics:





Close up of the damage on that wheel:


Here is a mark that was on one of the wheels:

I don't know which wheel that is on and I tried looking at the pics to see which one it is and couldn't tell by the pics. So I just stuck that pic here at the end just so people would know that one of the wheels has that mark on it.

None of the lips have any curb rash.

Here is the original tool to get off the center cap:

and the rest of the tools:


Looking to get $1000 picked up for these. Will negotiate, just send a PM.

I am located in So Cal (Orange County)

tsx

bump

ZumnRx8

Just FYI:
1. RX8 wheels stock are 18x8 and most people go wider....not smaller

2. Price is good, if someones willing to get a smaller width, go for it.

3. Try an Accord Forum.

No threadcrap just info...

tsx

Ah thanks for the info. I guess if it means anything, a 235 series tire can be put on a 7.5" wheel. I know of a few TSX guys who have done that.

ZumnRx8

Good LUCK, it really is a good sale, besides the width of the wheels.

tsx

yeah, it isn't very often you can get rare advans for a cheap price

RX OCHO

how much tread is left on the tires?

tsx

Tires are shot.

swoope

iTrader: (5)

yea,

rare wheels in so cal. not the right size for the forum.

that is very odd, not..

beers

tsx

Hah you guys are pretty harsh :P

swoope

iTrader: (5)

harsh / honest? a big cup of yes on that..

at least you have a clue.. bonus!

but +51 at 7.5, wtf does that fit?

beers

tsx

It fits whatever you want it to fit. I believe there is a good reason that companies make spacers. I'm pretty sure they don't do it for laughs.

ZumnRx8

by the look of his Name it fits a TSXq

swoope

iTrader: (5)

**** you are going to add a spacer to make that fit what?

the size is wrong for this car to begin with..

you are here why?

selling **** that does not fit, you must a quite?


beers

tsx

If you don't like the wheels then stop looking at my thread and stop flaming me.

swoope

iTrader: (5)

wait,

you are going to bust me for asking questions about the wrong sized wheels for the rx8..

and you dont have a post here??

let me know how that works out.

beers

ZumnRx8

the "you are here why" was kinda harsh

but i also reccommend that he trys to sell them on a tsx, accord, or even s2k forum....which alll use 7.5

swoope

iTrader: (5)

not at all.

you cannot space this wheel to fit right.

that is the whole point..

****, i have run 245 40 18 on 7.5 inch wheels,, and it did well and still does..

but not on 51 offset wheels.. slight yes. will it fit yes.. fail. yes..

sell your **** on the site that you got it from.

beers

swoope

iTrader: (5)

flaming you?

how.

you dont know the correct offset and size for the site you are posting on?

get back to me on that...

i reported my on post already to make this all go away..

beers

tsx

Those weren't questions, and don't pretend that they were. Those were just attacks.

Maybe I posted them here because someone else might be interested in them. Maybe other people have 2 cars and they might want these for their 2nd car. Or they have friends who might want these.

I don't know why you are harassing me. I guess it is a Friday night so maybe you were out drinking or something, I have no idea.
If you are drunk and are just looking for people to flame, here are some things for you to do:
https://www.rx8club.com/rx-8-parts-sale-wanted-44/fs-oz-ultraleggeras-5zigen-rims-172585/ He's selling 2 sets of 18x7.5 +48, you can attack him about 2 sets of rims.

https://www.rx8club.com/rx-8-parts-sale-wanted-44/fs-momo-v-10-wheels-18x7-5-a-172277/ wow! look an 18x7.5 +45. My wheels with a 10mm spacer would be +41. But you basically said no spacers could make my wheels work, so I guess you better go attack that guy.


Digging further down, I found this thread: https://www.rx8club.com/rx-8-parts-sale-wanted-44/sale-rpf1s-18-x7-5-w-225-40-18s-155587/
You DEFENDED the OP and said that the size would be fine. "the wheels mention will fit fine" and again "really.

the op stuff will fit fine.. "
Only need a 3mm spacer to get my wheels to the EXACT same size as those wheels. But my wheels are **** and will never work, but those, those are fine.


I don't know if you are just hating on me because I have an Acura and not a Mazda, or if you are just in a bad mood. Like I said, if you don't like these wheels, stop looking at my thread. I'm not forcing you to look at the thread, and I am not forcing you to buy these wheels. I didn't post them here for you or for your approval. I did nothing wrong and did nothing to foul you, yet you come in here and start attacking me even though you have previously defended someone with basically the same size wheels.

swoope

iTrader: (5)

wow,

you need to learn about offset..

you claim + 51.

well adding is adding.. if you add a 10 mm spacer it is now 61. how hard is that..

so yes, i am defensive here. people get ripped off by zero post wonder like you..

get back to me on the offset thing..

and not really hating, i would prefer the people that support the site with the right size wheels sell them. not some drive by poster, no offense. ebay>>

beers

tsx

Hm look at PBlue: "How bad could 7.5 in hurt. Its 1mm less outside and 10mm less inside. Stance is 2mm less than stock. I was debating picking up a set of 18x7.5 cause they're so cheap. not for track rims but for around town rims. i dont think i could even find any good looking 18x8.5"
Looks like he has an open mind.

It's for people like that that these wheels were posted here.

In summary of this whole thread, these wheels are not perfect for the RX-8. Hell, these aren't even perfect on a TSX, but they work and they are cheap Advans. Maybe someone here will be interested in these, maybe not. If no one is interested, than they get sold to someone else and I come back and close this thread. You never know who will see these wheels, and so far, other than yourself, no one else has seemed to mind these being posted here.

tsx

Are you kidding me? You have to be either drunk, joking, or you have no idea how offsets and wheel spacers work.

If you really don't understand how wheel spacers work, please tell me. I will be happy to explain them. I am going to guess you were just messing around though...

swoope

iTrader: (5)

yep,

i am drunk, and joking and i have no idea how wheel spacers work.

the fact that you mention wheel spacers with 51 off set wheels kinda closes the deal for me..

i will ask the other question that is not known but important.

how much do they weigh?

and you are on your way..

amf.

beers

dozer

iTrader: (3)

rx8club.com we know drama, apparently we also know grumpy old men