feeler rotary shaped exhaust tips
10-30-2009, 07:54 PM
#1
feeler rotary shaped exhaust tips
just a feeler for now. i have the material to build at least one set of duals and either another set of duals but for sure a single exit exhaust (3 tips maybe 4). the tips themselves are 6" long on top and either straight down or 5 1/2" on the bottom to follow the line of the rear bumper (like my pic of my set not currently on my car yet due to some front end damage from a possume). also i can make the inlet pipe as long as needed (mine are 2 3/4") and either 2 1/2" outside diameter or 3" outside diameter( the 3" matches up perfect to the turbo xs exhaust).
as of now i will only be making these sets and maybe no more in the future. these will be 316 grade soild stainless steel, tig welded, and buffed to a smooth finish. these will have to be welded on by you or at a shop.
price would be 400 shipped for a dual set and 225 shipped for a single side. ill let everone know tomorrow if i can make 3 or 4 tips. ill anwser any questions but please send to my email bumblebeerx8@yahoo.com. i have to work the next few days so email so i can give you a prompt reply.
ill also concider trade or trade plus money on either end for
mazdaspeed,r-magic carbon or fiberglass rear bumper replica (decent fitment must be shown used or not is ok).
tsunami front bumper.
mazdaspeed,r-magic, or gto spoiler.
carbon fiber vented hood.
kei office or dragon eyelides
bhr ignition
other offers will be concidered but i have a gereral plan for my car next year
any of these in new or good condition pics needed and we can go from there. heres pictures from my thread for reference
as of now i will only be making these sets and maybe no more in the future. these will be 316 grade soild stainless steel, tig welded, and buffed to a smooth finish. these will have to be welded on by you or at a shop.
price would be 400 shipped for a dual set and 225 shipped for a single side. ill let everone know tomorrow if i can make 3 or 4 tips. ill anwser any questions but please send to my email bumblebeerx8@yahoo.com. i have to work the next few days so email so i can give you a prompt reply.
ill also concider trade or trade plus money on either end for
mazdaspeed,r-magic carbon or fiberglass rear bumper replica (decent fitment must be shown used or not is ok).
tsunami front bumper.
mazdaspeed,r-magic, or gto spoiler.
carbon fiber vented hood.
kei office or dragon eyelides
bhr ignition
other offers will be concidered but i have a gereral plan for my car next year
any of these in new or good condition pics needed and we can go from there. heres pictures from my thread for reference
10-31-2009, 03:23 AM
#5
piricey kinda concidering the knight sport one were anywhere from 800-1200 shipped. the only difference mine are stainless and theirs are titanium. material wise there was only a 100 dollar difference but to weld it was about double the time and shielding gas for pre and post purging. the material alone for one tip is 150+shipping for the high grade of stainlessnand take no less than 4 hours each. all welds are back purged. so i believe i have a fair price on these and my goal is to only sell a few sets to keep them very exclusive
10-31-2009, 11:33 AM
#7
1% evil, 99% hot gas.
iTrader: (21)
How does the exhaust get out with no holes in the base plate?!?!? 
(Second picture, no hole through the bottom piece.)
These do look interesting, but I would like to see what they look like on a car. The tips on my stainless B&B muffler have split and look ugly (don't think they expected anybody to track it), so these might make fine replacements.
(Second picture, no hole through the bottom piece.)These do look interesting, but I would like to see what they look like on a car. The tips on my stainless B&B muffler have split and look ugly (don't think they expected anybody to track it), so these might make fine replacements.
10-31-2009, 12:30 PM
#8
The hole was not cut out in the picture yet and as far as my set going on the car not sure when that will be I have front end damage from hitting a possum the other morning so that is priority at this point before I cut and weld the tips on.
03-04-2010, 08:50 AM
#10
RX8 & RX7 owner
Are you talking about the BHR Upgrade Ignition Kit right? Or did you make one yourself? If you are talking about the BHR Upgrade ignition kit then I am interested in a Trade+Monies for the BHR Ignition Kit. PM me and I'll consider the price if its right. & PICS please.
03-04-2010, 11:34 AM
#11
The tips are complete but weather hasn't been good to put them on. I'm starting this weekend putting all my new parts on. Thanks zumn but I have bought a bhr kit. All that's left is race roots under bracing and front strut bar for trade
03-15-2010, 09:21 AM
#13
1% evil, 99% hot gas.
iTrader: (21)
Hot! How about some shots from about 20 feet away at about the eyeball height of a following car? And one from the the side just a little behind the car? I'm trying to get an idea what this will look like to other drivers and in the parking lot.
I'm going to have to start eating ramen noodles for lunch for a couple months to save my pennies...
I'm going to have to start eating ramen noodles for lunch for a couple months to save my pennies...
Thread
Thread Starter
Forum
Replies
Last Post
{FS/WTT} 04 Black Rx-8 TRACK AUTOX TIMEATTACK
Billy Marcial
RX-8's For Sale/Wanted
5
03-01-2018 06:50 AM
